Cart 2 india

Specification
Brand : QIANMOON
BulletPoint1 : ⚒【High Efficiency】This high-powered foam cutting machine features electric wire cutting which provides fast, accurate, flat cuts and clean edge sealing to increase your productivity.
BulletPoint2 : ⚒【Precise Cutting】The worktable is thoughtfully designed with scales on all four sides making it easy for you to accurately measure each piece of material. The 0.01in heating wire design allows for more accurate cutting and less error, as well as a lower loss ratio.
BulletPoint3 : ⚒【Adjustable Voltage】The adapter has a voltage adjustment knob that allows you to adjust the temperature (0-932°F) by controlling the voltage level for cutting different materials and thicknesses and getting better cutting results.
BulletPoint4 : ⚒【Adjustable Support】You can change the position of the electric wire by adjusting the angle of the support to cut different shapes of material. The tilting angle allows for beveled, vertebral cuts. When the holder is 90 degrees perpendicular to the table, it can be used to cut squares, squares, and cylinders.
BulletPoint5 : ⚒【Easy to Install】Thanks to its simple construction, the complete range of accessories, and the instruction manual, you can easily install it in a short time.
Color : Light Blue, Silver
ExternallyAssignedProductIdentifier1 : 731851027365
ExternallyAssignedProductIdentifier2 : 0731851027365
FinishType : Brushed
HandOrientation : Ambidextrous
IncludedComponents : kitchen scissors
IncludedComponents1 : 1* Worktable 1* L-shape Conductive support
IncludedComponents2 : 1* Guiding Rule 1* Circular Die 1* Angle Board
IncludedComponents3 : 1* Adapter 1* English Manual All Accessories for Use
ItemName : QIANMOON Hot Wire Cutter Foam Cutting Machine Table, Cutting Forming and Sculpting Styrofoam and Other Foam Materials,for Sponge, Pearl Cotton, Polystyrene Cutting
ItemPackageDimensions_Height : 3.93 inches
ItemPackageDimensions_Length : 17.32 inches
ItemPackageDimensions_Width : 14.96 inches
ItemPackageQuantity : 1
ItemTypeKeyword : craft-shears
Manufacturer : QIANMOON
Material : Multi-layer Panel and Stainless Steel
ModelName : Hot Wire Foam Cutting Machine
ModelNumber : YSR2
NumberOfItems : 1
PackageLevel : unit
PartNumber : S9ML8
PowerSourceType : AC
ProductDescription :

This practical foam cutting machine allows fast and precise cutting of foam, saving you a lot of time and effort. It is suitable for school projects, artists, and factories to make billboards, crafts, and molds. This tool offers a great way to unleash your creativity. It will be the ideal choice for you!

Details

Guiding Rule: It is equipped with a stainless steel guiding rule to assist you in making straight cuts. The side fixing nuts hold it firmly to the table and prevent it from shifting.

Wire Storage Wheel: The large wire storage wheel can store up to about 20m/65.61ft of heating wire, so you can cut for longer periods of time at once without having to replenish the wire frequently.

LED Display: The adapter has an LED display that shows the voltage value in real time for better control of the cutting process.

Circular Die: The circular die assists in round cutting and produces a more regular circle, which makes cutting easier.

Adjustable Feet: There are four adjustable feet on the bottom of the worktable to ensure stability even on uneven surfaces. At the same time, it prevents the table from being scratched.

Application

The foam cutting machine is used to cut foam, sponge, pearl cotton, and other hot-melt materials with a melting point below 350℃. It can cut angles, cylinders, sharp cones, rings, tapers, straight lines, and other shapes.

How to Install

1. Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.

2. Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.

3. Pull out the heating wire about 30cm/11.81in from the wire wheel.

4. Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.

5. Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

Specification

Material: Multi-layer Panel and Stainless Steel

Color: Light Blue, Silver

Input Voltage: 100-240V AC

Output Voltage: 18V/4A DC

Power: 72w

Plug: US Standard

Adjustable Temperature Range: 0-500°C/0- 932°F

Cutting Height: 0-25cm/0-9.84inch

Heating Wire Diameter: 0.28mm/0.01in

Cutting Width: 0-28cm/0-11.02in

Worktable Width: 33cm/12.99in

Workbench length: 39cm/15.35in

Packing Size: 44*38*10cm/17.32*14.96*3.93in

Gross Weight: 3.5kg/7.7lbs

Net Weight: 3kg/6.6lbs

Package Included

1* Worktable

1* L-shape Conductive support

1* Guiding Rule

1* Circular Die

1* Angle Board

1* Adapter

1* English Manual

All Accessories for Use

ProductSiteLaunchDate : 2024-05-30T07:19:26.790Z
RegulatoryComplianceCertification : NSDOS.0384EM-005
Size : Large
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Wattage : 72 watts