Cart 2 india

Specification
Brand : LCZNXJJY
BulletPoint1 : Note: The thermostatic power supply can only lower the temperature based on the original highest temperature, and cannot increase the temperature based on the original temperature. Please let it heat up cutting pen before use, and rest on stand when it works more than 10 minutes. After cooling, wipe the heating needle with a damp sponge to avoid blackening and hardening due to oxide adhesion
BulletPoint2 : Premium Stainless Steel Material: This electric hot cutter pen is made of stainless steel and the handle is made of enduring plastic material. It is sturdy and enduring and is designed for long-term use. You can cut the template or foam block from any angle and then process it into the desired shape.It cuts foam quickly and gently, with clean edges and no residue
BulletPoint3 : Easy to Use: plug the cutting pen into the power socket, and then turn on the switch on the handle to start working. after the hot wire cutter is powered on, it can heat up quickly and the temperature is very high after 10 seconds, styrofoam cutter hot wire can be used to cut and engrave the foam from any starting point. When adjusting the temperature, you must look at the color displayed when the pen head is hot. When used for a short time, it can be adjusted to a slightly reddish color.
BulletPoint4 : Thermostatic Power Supply: Continuous use should not exceed 10 minutes to avoid burning the pen head. When adjusted to a low temperature and not red, it can be used continuously for 30 minutes and then cooled down for a few minutes before use. When the cut is too wide and uneven, the temperature of the cutting pen is too high. The temperature should be appropriately lowered to make the cut smooth and beautiful
BulletPoint5 : Cannot Be Bent Repeatedly: The styrofoam Cutting Hot Pen can not be repeatedly bent, when it needs to be bent, it can not be folded at a right angle when bending, and the rounded corner of R10 should be folded at the corner to ensure that the hot wire pen will not breakRepeated bending at a certain point may cause a break.
BulletPoint6 : Wide Application: This electric foam cutter can cut foam blocks, allowing you to give it a variety of shapes according to your imagination and needs. The electric hot cutter tool is suitable for low-density styrofoam, creative art modeling creation, billboard production, etc.
BulletPoint7 : When you encounter any problems in use, please contact us in time, If it is our product quality accident, we will give the refund guarantee as soon as possible
Color : Light Blue, Silver
HandOrientation : Ambidextrous
IncludedComponents : 1 × Electric Foam Cutter 1 × Power Cord 1 × Stand 1 × Instruction Manual
ItemLength : 25 centimeters
ItemName : LCZNXJJY Foam Cutters 18/24W Electric Foam Cutter 10cm Styrofoam Cutting Pen w Stand & Transformer Adaptor, Heated Foam Carving Knife, Hot Knife Foam Cutting Tool for Art Making Foam Carving
ItemPackageDimensions_Height : 30.7 centimeters
ItemPackageDimensions_Length : 3.6 centimeters
ItemPackageDimensions_Width : 3.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : craft-shears
Manufacturer : ZHILLKMA
Material : Multilayer Board, Stainless Steel, Aluminum Alloy
ModelName : Electric Foam Cutter
ModelNumber : 100mm
NumberOfItems : 1
PartNumber : Estinky5tf8mngih1030-02
ProductDescription :

Parts List:

1×Electric Foam Cutter 

1×Power Cord 

1×Stand 

1×Instruction Manual

Detailed description:

Specification:

Product Name: Electric Foam Cutter

Material: ABS + Stainless Steel

Heating core rod diameter: 2 mm

Plug Standard: US

Style (Optional): 

Style 01: 50 mm

Style 02: 100 mm

01: Heating core rod length: 55 mm

02: Heating core rod length: 105 mm

Plastic handle length: 130 mm

Handle diameter: 19 mm

Stainless steel connection end length: 20 mm

01: Total length of hot pen: 205 mm

02: Total length of hot pen: 255 mm

Voltage and current: 12V2A

01: Power: 18W

02: Power: 24W

Temperature: 450°

Socket specification: 5.5×2.1-2.5

Color: Blue

Notes:

1. The cutting pen should not work continuously for more than 30 minutes. After more than 30 minutes, it is best to turn off the power for 5 minutes before using it.

2. When cutting, wait until it melts before moving the pen. Do not use too much pressure to cut, otherwise the pen tip will break.

3. When bending, do not bend directly at a right angle, otherwise, it will break or short-circuit the circuit inside. You should bend >R5MM rounded corners and only bend once. Bending back and forth will break the pen tip.

4. When using the cutting pen, do not operate it vertically, because the heat of the pen tip will form a chimney effect and the heat will rise vertically. The rising heat will melt the handle. It is best to have a certain inclination.

5. After plugging in the power supply, it is forbidden to touch the metal part of the pen with your hands to be careful of burns.

ProductSiteLaunchDate : 2024-09-14T07:00:00.000Z
Size : 17.52*4.53*15.35
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700