Cart 2 india

Specification
Brand : FTUREPAC
BulletPoint1 : 【High efficient】: This product adopts electric heating wire cutting, which can heat up the heating wire to the required temperature in about 0-5 seconds, so as to cut the foam quickly and smoothly and improve the working efficiency.
BulletPoint2 : 【Accurate cutting】: The table is carefully designed with scales on all four sides to accurately measure each piece of material, and the 0.01” heater wire is designed to allow for more precise cutting, less error, and a lower rate of loss. The large wire storage wheel stores approximately 65.61 feet of heater wire, allowing you to complete your cuts without having to replenish the heater wire frequently.
BulletPoint3 : 【Adjustable design】: You can adjust the desired temperature from 32°F to 572°F by turning the voltage adjustment knob on the adapter. The cutting height, width and circle radius can also be adjusted to give you precise cutting results.
BulletPoint4 : 【Enjoy DIY】: The adapter is equipped with an LED display that shows the voltage value in real time for better control of the cutting process. By adjusting the angle of the bracket, you can change the position of the wire and cut different shapes of materials, you can easily get conical, square, cylindrical and other irregular shapes, fully enjoy the fun of DIY.
BulletPoint5 : 【Easy to operate】: This product is easy to operate, the size of the working plate is 15.35*12.99 inches, the stainless steel guide ruler can help you to make straight line cuts, suitable for beginners and professionals to use easily.
Color : Light Blue, Silver
ExternallyAssignedProductIdentifier1 : 0769092357415
ExternallyAssignedProductIdentifier2 : 769092357415
IncludedComponents1 : 1* Foam Cutting Machine
IncludedComponents2 : 1* Power Adapter
IncludedComponents3 : 1* English Manual
IncludedComponents4 : Other Accessories for Assembly
ItemName : Hot Wire Cutter Thermocut Foam Cutting Machine, 72W Hot Wire Foam Cutter Machine with LED Display, 0.28mm Heating Wire Diameter, for Cutting Foams, Sponge, Pearl Cotton
ItemPackageDimensions_Height : 1.38 inches
ItemPackageDimensions_Length : 13.78 inches
ItemPackageDimensions_Width : 2.95 inches
ItemPackageQuantity : 1
ItemTypeKeyword : craft-shears
Manufacturer : FTUREPAC
Material : Multilayer Board, Stainless Steel, Aluminum Alloy
ModelName : foam cutter table
ModelNumber : hot wire foam cutter table
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PartNumber : Foam Cutter Tool Tabletop
PowerSourceType : AC/DC
ProductDescription :

Application

It can be used to cut foam, sponge, pearl cotton, ribbon, KT board, etc. It can cut angles, cylinders, sharp cones, rings, cones, straight lines, and other shapes.                                            

How to Install

1.Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.

2.Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.

3. Pull out the heating wire about 11.81in from the wire wheel.

4.Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.

5.Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

Specification 

Material: Multilayer Board, Stainless Steel, Aluminum Alloy

Color: Light Blue, Silver

Mount Type: Countertop

Assembly Required: Yes

Plug Type: US Standard

Power Supply: Corded Electric

Adapter Input: 100-240V

Voltage: 18V    

Power: 72W

Preheating Time: 0-5 Seconds

Cutting Height: 0-25cm/0-9.84 in

Cutting Width: 0-28cm/0-11.02in

Cutting Diameter: 0-19cm/0-7.48in

Heating Wire Diameter: 0.28mm/0.01in

Adjustable Temperature Range: 0~300℃/32~572℉

Adjustable Bracket Angle Range: 30-90°

Power Cord Length: 2.5m/8.2ft  

Workboard Size: 39*33cm/15.35*12.99in 

Package Size: 44.5*11.5*39cm/17.52*4.53*15.35in

Gross Weight: 3.3kg/7.27 lbs

Net Weight: 3kg/6.61 lbs

Package Included

1* Foam Cutting Machine

1* Power Adapter

1* English Manual

Other Accessories for Assembly

Notes

1.Please read the manual completely before installation and use.

2.Please do not touch the heating wire of the cutting machine when the power is on. Please keep a certain distance from the heating wire. If necessary, wear gloves to avoid scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.

3.Please use the product in a ventilated environment. It is not advisable to allow small children to play with this machine.

4.Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine.

5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. 

ProductSiteLaunchDate : 2024-09-25T10:09:37.638Z
Size : 31.50X3.00X3.00CM
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Adults
UnitCount : 1
UnspscCode : 27112700
Voltage : 240 volts
WarrantyDescription : 90 days
Wattage : 72 watts