Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : High Efficiency: This high-powered foam cutting machine features electric wire cutting which provides fast, accurate, flat cuts and clean edge sealing to increase your productivity
BulletPoint2 : Precise Cutting: The worktable is thoughtfully designed with scales on all four sides making it easy for you to accurately measure each piece of material. The 0.01in heating wire design allows for more accurate cutting and less error, as well as a lower loss ratio
BulletPoint3 : Adjustable Voltage: The adapter has a voltage adjustment knob that allows you to adjust the temperature (0-932°F) by controlling the voltage level for cutting different materials and thicknesses and getting better cutting results
BulletPoint4 : Adjustable Support: You can change the position of the electric wire by adjusting the angle of the support to cut different shapes of material. The tilting angle allows for beveled, vertebral cuts. When the holder is 90 degrees perpendicular to the table, it can be used to cut squares, squares, and cylinders
BulletPoint5 : Application:The foam cutting machine is used to cut foam, sponge, pearl cotton, and other hot-melt materials with a melting point below 350℃ It can cut angles, cylinders, sharp cones, rings, tapers, straight lines, and other shapes
Color : Light Blue, Silver
IncludedComponents : adorns
ItemDisplayDimensions_Height : 4 centimeters
ItemDisplayDimensions_Length : 6 centimeters
ItemDisplayDimensions_Width : 6 centimeters
ItemName : AGULIUM Hot Wire Foam Cutter Table, Electric Tabletop Hot Wire Foam Cutter, Working Table Tool Sponge Styrofoam Cutting Machine for Cutting, Forming Sculpting Styrofoam and Other Foam Materials, 72W
ItemPackageDimensions_Height : 25.4 centimeters
ItemPackageDimensions_Length : 8.3058 centimeters
ItemPackageDimensions_Width : 20.8026 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : craft-foam
Manufacturer : AGULIUM
Material : Bone China
Material1 : Polyurethane (PU)
Material2 : Foam
MetalType : Stainless Steel
ModelName : Hot Wire Foam Cutter Table
ModelNumber : 2MS9ML8
NumberOfItems : 1
PartNumber : 2MS9ML8
ProductDescription :

Details

• LED Display: The adapter has an LED display that shows the voltage value in real time for better control of the cutting process.

 

How to Install

1. Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.

2. Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.

3. Pull out the heating wire about 30cm/11.81in from the wire wheel.

4. Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.    

5. Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

 

Specification

• Material: Multi-layer Panel and Stainless Steel
• Color: Light Blue, Silver
• Input Voltage: 100-240V AC
• Output Voltage: 18V/4A DC
• Power: 72w
• Plug: US Standard
• Adjustable Temperature Range: 0-500°C/0- 932°F
• Cutting Height: 0-25cm/0-9.84inch
• Heating Wire Diameter: 0.28mm/0.01in
• Cutting Width: 0-28cm/0-11.02in
• Worktable Width: 33cm/12.99in
• Workbench length: 39cm/15.35in
• Packing Size: 44x38x10cm/17.32x14.96x3.93in
• Gross Weight: 3.5kg/7.7lbs
• Net Weight: 3kg/6.6lbs

 

Package Included

• 1x Worktable
• 1x L-shape Conductive support
• 1x Guiding Rule
• 1x Circular Die
• 1x Angle Board
• 1x Adapter
• 1x English Manual
• All Accessories for Use

 

ProductSiteLaunchDate : 2024-04-11T08:57:25.444Z
Size : 6x6cm
Style : centimeter
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Stone
SurfaceRecommendation3 : Por
SurfaceRecommendation4 : Glass
SurfaceRecommendation5 : Wood
UnitCount : 6
UnspscCode : 27112700
WarrantyDescription : Free one-year warranty on manufacturer's defects only