Cart 2 india

Specification
AutoPartPosition : rear
Brand : FSYHVVY
BulletPoint1 : Replace Bad Boy 014-2050-00 Rubber Bearing Cover - MZ
BulletPoint2 : This a Dust Cover for the NEW 2016 Bad Boy Maverick Series mower!
BulletPoint3 : Each Bad Boy Mower uses 2 of these dust covers on the top of the front wheel yoke.
BulletPoint4 : Replacement dust cover for the following years and models 2012 MZ. 2013 MZ. 2013 MZ Magnum. 2013 ZT Elite. 2013 CZT Elite. 2014 MZ. 2014 MZ Magnum. 2014 ZT Elite. 2014 CZT Elite. 2015 MZ. 2015 MZ Magnum. 2015 ZT Elite. 2015 CZT Elite. 2016 MZ. 2016 MZ Magnum. 2016 ZT Elite. 2016 CZT Elite. 2016 Maverick
BulletPoint5 : Your gonna need to use a blow dryer or let them sit in the sun before you install them, otherwise if your try with the caps being cold, you will not get them on without tearing them or cutting them. Won't take much heat, just know that once they are installed and then cool down,。they are going to stay put。
IncludedComponents : Not
ItemName : FSYHVVY Replace Bad Boy 014-2050-00 2012 to 2016 Models 2 Dust Covers
ItemPackageDimensions_Height : 9.906 centimeters
ItemPackageDimensions_Length : 7.493 centimeters
ItemPackageDimensions_Width : 8.1026 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lawn-mower-covers
ItemTypeName : Not
Manufacturer : FSYHVVY
Material : Oxford
ModelName : 2016 Maverick
ModelNumber : 014-2050-00
NumberOfItems : 1
PartNumber : 014-2050-00
ProductDescription : Replace Bad Boy 014-2050-00 Rubber Bearing Cover - MZ
This a Dust Cover for the NEW 2016 Bad Boy Maverick Series mower!
Each Bad Boy Mower uses 2 of these dust covers on the top of the front wheel yoke.
Replacement dust cover for the following years and models 2012 MZ. 2013 MZ. 2013 MZ Magnum. 2013 ZT Elite. 2013 CZT Elite. 2014 MZ. 2014 MZ Magnum. 2014 ZT Elite. 2014 CZT Elite. 2015 MZ. 2015 MZ Magnum. 2015 ZT Elite. 2015 CZT Elite. 2016 MZ. 2016 MZ Magnum. 2016 ZT Elite. 2016 CZT Elite. 2016 Maverick
Your gonna need to use a blow dryer or let them sit in the sun before you install them, otherwise if your try with the caps being cold, you will not get them on without tearing them or cutting them. Won't take much heat, just know that once they are installed and then cool down,。they are going to stay put。
ProductSiteLaunchDate : 2023-06-28T02:55:30.369Z
StrapType : Drawstring
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
WaterResistanceLevel : waterproof