Cart 2 india

Specification
Brand : uxcell
BulletPoint : For use with #10 SMART-BIT tools|Parabolic Fluted Bits|5 Replacement Bits|For Decks and Woodworking
BulletPoint1 : Combination Drill and Tap Bit: Thread Size: M5 x 0.8; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
BulletPoint2 : Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
BulletPoint3 : Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
BulletPoint4 : Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
BulletPoint5 : Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
BulletPoint6 : 6Pcs Twist Drill Bits: Diameter: 3mm, 4mm, 5mm, 6mm, 6.5mm, 8mm. Made of HSS Material with Titanium coating, the drill bits edge sharp, faster with less effort, suitable for drilling holes in a variety of materials, such as wood, metal, plastic, concrete and more.
Color : Black
CuttingAngleString : 1/4 inches
ExternallyAssignedProductIdentifier1 : 099385042248
ExternallyAssignedProductIdentifier2 : 0099385042248
FinishType : Uncoated
IncludedComponents : Drilling Tools
ItemName : uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M5 x 0.8 Metric Uncoated M35 Cobalt High Speed Steel Spiral Flute Drilling Tapping Tool 2pcs
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : countersink-bits
Manufacturer : uxcell
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : High Speed Steel
Material3 : Alloy Steel
ModelNumber : a22040200ux0945
NumberOfItems : 1
PartNumber : a22040200ux0945
ProductDescription : Specifications:
Thread Size: M5 x 0.8
Hex Shank Size: 1/4"
Drilling Length: 22mm / 0.87"
Total Length: 68mm / 2.68"
Material: M35 Cobalt High Speed Steel
Finish: Uncoated
Package Content: 2pcs x Combination Drill and Tap Bit

Descriptions:Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
Suitable for processing holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.
M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Features just the base substrate without any coatings, good for most general purpose thread tapping.
Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping. Micro taps (such as M1-M3.5) are mainly used in clocks and watches, tapping wood and soft metals with lower hardness.

ProductSiteLaunchDate : 2022-05-20T08:40:34.365Z
Size : M5 x 0.8
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Aluminum,Stainless Steel,Steel
SurfaceRecommendation1 : Tile
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Glass
SurfaceRecommendation4 : Wood
UnitCount : 1