Cart 2 india

Specification
Brand : W.L. Fuller Inc.
BulletPoint1 : Tapered drill with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws
BulletPoint2 : Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking
BulletPoint3 : Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth
BulletPoint4 : 1/4" quick-change shank reduces slipping in standard chucks and is compatible with all 1/4" quick-change chucks, including impact drills
BulletPoint5 : Adjustable stop collar attaches to counter bore with two hex screws for a secure fit and can be adjusted for desired counter bore depth
Color : Multi
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0807200565441
ExternallyAssignedProductIdentifier10 : 0733353902614
ExternallyAssignedProductIdentifier11 : 00042526923203
ExternallyAssignedProductIdentifier2 : 807200565441
ExternallyAssignedProductIdentifier3 : 042526923203
ExternallyAssignedProductIdentifier4 : 785533682793
ExternallyAssignedProductIdentifier5 : 0042526923203
ExternallyAssignedProductIdentifier6 : 0732454245811
ExternallyAssignedProductIdentifier7 : 5915903613019
ExternallyAssignedProductIdentifier8 : 0785533682793
ExternallyAssignedProductIdentifier9 : 7241870835863
FinishType : Brass
IncludedComponents : `1
IncludedComponents1 : NO12 COUNTERSINK
IncludedComponents2 : NO12 COUNTERSINK
IncludedComponents3 : NO12 COUNTERSINK
IncludedComponents4 : NO12 COUNTERSINK
IncludedComponents5 : NO12 COUNTERSINK
ItemName : Set of 5 Countersinks with Hex Shank Taper Point Drills & 1 - Hex Key, by W. L. Fuller, for # 5, 6, 8, 10, & 12 Screws Made in The USA
ItemPackageDimensions_Height : 21.3 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 10.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : countersink-bits
Manufacturer : W.L. Fuller Inc.
Material : Carbon Steel
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelNumber : 10393005C
NumberOfItems : 1
PackageLevel : unit
PartNumber : 10393005C
ProductDescription : TPS-LOCK SYSTEM TAPER POINT DRILLS These are the best professional High Speed Steel Taper Point Drills with 1/4 Hex Power Shanks available. And now with our new TPS-Lock System, you have the positive drive provided by a one piece tool and cost savings provided by a drill with a detachable shank, plus a Lifetime Guarantee** against breakage. Our TPS-Lock System will not release the drill until you are ready to take it apart. "C" Countersinks Used to countersink and counterbore for the heads of screws in woods, plastics, and non-ferrous materials. Made of Carbon Steel and heat-treated for long tool life. The Type C countersink is designed for use in all woods, plastics, and non- ferrous metals. The countersink is held in place with 2 hex socket set screws fastened into the flutes of the drill. This countersink can be mounted on taper point, brad point and regular point drills. C5 = 3/8 COUNTER SINK, & 1/8 TAPER POINT DIAMETER C6 = 3/8 COUNTER SINK, & 9/64 TAPER POINT DIAMETER C8 = 3/8 COUNTER SINK, & 11/64 TAPER POINT DIAMETER C10 = 7/16 COUNTER SINK, & 13/64 TAPER POINT DIAMETER C12 = 1/2 COUNTER SINK, & 7/32TAPER POINT DIAMETER W.L. Fuller Inc. is a family owned, third generation, manufacturer of the best Countersinks, Counterbores, Plug Cutters, Taper Point Drills, Brad Point Drills, and Step Drills. All made 100% in the U.S.A. today. With over 60 years experience manufacturing tools to cut woods, plastics, and metals. All of our products carry our Satisfaction Guarantee. ** We will replace any Taper Point Drill that breaks before the cutting edges have worn out **
ProductSiteLaunchDate : 2022-03-23T22:22:14.871Z
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=2630036
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Brass
SurfaceRecommendation2 : Copper
SurfaceRecommendation3 : Wood
SurfaceRecommendation4 : Fiberglass
UnitCount : 1