Cart 2 india

Specification
Brand : Alfa Tools
BulletPoint : 6-50mm 6/8 Flute 60/90/120 Degree Chamfer Countersink Drill Bits(6/8/10/12.5/14/16/18/20/22/25/30/32/35/40/45/50mm)
BulletPoint1 : High speed steel single flute countersink
BulletPoint2 : 5/8" body diameter, 1/2" shank diameter
BulletPoint3 : 2-3/4" Overall length
BulletPoint4 : 82 Degree
BulletPoint5 : 1 per pack
BulletPoint6 : [✔] Kindly remind: if unit can't satisfy you, please contact my team first for solve your issues.
Color : #20+#25+#32
CuttingAngleString : 82.0 degrees
ExternallyAssignedProductIdentifier : 8159811966004
ExternallyAssignedProductIdentifier1 : 721511390069
ExternallyAssignedProductIdentifier2 : 0721511390069
ExternallyAssignedProductIdentifier3 : 00721511390069
FinishType : Uncoated
IncludedComponents : Tools
ItemName : Alfa Tools CSF50526 5/8" x 1/2" High-Speed Steel 82° Single Flute Countersink
ItemPackageDimensions_Height : 0.63 inches
ItemPackageDimensions_Length : 2.75 inches
ItemPackageDimensions_Width : 0.63 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : countersink-bits
Manufacturer : Alfa Tools
Material : High Speed Steel
Material1 : High Speed Steel
Material2 : Alloy Steel
ModelNumber : CSF50526
NumberOfFlutes : 1
NumberOfItems : 1
PartNumber : CSF50526
ProductDescription : Specifications:
Thread Size: M10 x 1.5
Hex Shank Size: 1/4"
Drilling Length: 36mm / 1.42"
Total Length: 73mm / 2.87"
Material: High Speed Steel 4341
Finish: Uncoated
Package Content: 2pcs x Combination Drill and Tap Bit

Descriptions:Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
Suitable for processing holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.
High speed steel tool has high hardness and toughness, wear resistance and heat resistance. Features just the base substrate without any coatings, good for most general purpose thread tapping.
Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping. Micro taps (such as M1-M3.5) are mainly used in clocks and watches, tapping wood and soft metals with lower hardness.

ProductSiteLaunchDate : 2013-07-16T02:27:45.728Z
Size : M10 x 1.5
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Aluminum,Steel
SurfaceRecommendation1 : Iron
SurfaceRecommendation2 : Wood
TeamName : binifiMux
UnitCount : 1