Cart 2 india

Specification
Brand : Eastwood
BulletPoint1 : RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator. This paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal.
BulletPoint2 : HOW TO USE: Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron. Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel. Remove any grease, oils, or other surface contaminants
BulletPoint3 : 2X Stronger Than Original Rust Encapsulator
BulletPoint4 : SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product. Use in a well ventilated area away from open flame. Store spray in a cool dry place.
BulletPoint5 : WARRANTY: Comes with a 1-year limited warranty and 90 day return.
Color : Matte Red
ColorCode : Matte Red
Coverage : 384 Square Feet
ExternallyAssignedProductIdentifier1 : 607174172795
ExternallyAssignedProductIdentifier2 : 0607174172795
FinishType : Matte
Hazmat1 : AEROSOLS
Hazmat10 : DE_LimitedQuantity
Hazmat11 : EG_LimitedQuantity
Hazmat12 : ES_LimitedQuantity
Hazmat13 : FR_LimitedQuantity
Hazmat14 : GB_LimitedQuantity
Hazmat15 : IN_GroundOnly
Hazmat16 : IT_LimitedQuantity
Hazmat17 : JP_GroundOnly
Hazmat18 : MX_LimitedQuantity
Hazmat19 : NL_LimitedQuantity
Hazmat2 : UN1950
Hazmat20 : PL_LimitedQuantity
Hazmat21 : SA_LimitedQuantity
Hazmat22 : SE_LimitedQuantity
Hazmat23 : SG_LimitedQuantity
Hazmat24 : TR_LimitedQuantity
Hazmat25 : US_ORMD
Hazmat26 : ZA_LimitedQuantity
Hazmat3 : 2.1
Hazmat4 : AE_LimitedQuantity
Hazmat5 : AU_LimitedQuantity
Hazmat6 : BE_LimitedQuantity
Hazmat7 : BR_LimitedQuantity
Hazmat8 : CA_LimitedQuantity
Hazmat9 : CN_GroundOnly
IncludedComponents : (1) Gallon Eastwood Rust Encapsulator Plus Red Oxide
ItemDisplayWeight : 6.3 pounds
ItemForm : Liquid
ItemName : Eastwood Matte Red Rust Encapsulator Plus | Long Lasting Durable Finish 1 Coat Maximum Rust Protection | Heat Resistance up to 350 degrees Fahrenheit | Gallon 1 Pack
ItemPackageDimensions_Height : 7.8 inches
ItemPackageDimensions_Length : 2.7 inches
ItemPackageDimensions_Width : 2.6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-rust-treatment-chemicals
ItemVolume : 128 fluid_ounces
LiquidVolume : 16 fluid_ounces
Manufacturer : Eastwood
Material : Molybdenum Disulfide
ModelName : Eastwood
ModelNumber : 73935ZP
NumberOfItems : 1
OeManufacturer : JEGS
OemEquivalentPartNumber : 72050
PaintType : Spray
PartNumber : 73935ZP
ProductDescription :

Stop rust in its tracks with Our Rust Encapsulator. This paint-over-rust formula is the easiest way to stop rust and corrosion from forming and prevent existing rust from spreading. It seals metal parts and penetrates beneath the surface to encase rust while leaving behind a paintable surface. Rust Encapsulator can be used as a primer for a variety of topcoats or left as-is if you prefer a low-gloss finish. Ideal for chassis and undercarriage rust prevention. With high heat resistance, you can even apply it to the engine bay.

NOTE: After usage, wipe recess of can with clean rag and solvent to remove any product. If product is left in lid area recess of can and lid is re attached, the product will bond the two pieces together. This will render the product useless, as it will be very difficult to separate the lid from the can.

NOTE: It is highly recommended to use this product in conjunction with a plastic mixing cup and lid for short term storage after initial use.

ProductSiteLaunchDate : 2020-12-30T16:10:57.748Z
RecommendedUsesForProduct : Long lasting corrosion prevention compound for Navy, U.S. Military and NATO aircraft metal surfaces
Size : 128 Fl Oz (Pack of 1)
SpecificUsesForProduct : Interior/Exterior
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Metal
UnitCount : 128
UnspscCode : 31211500
VolumeCapacityName : 128