Cart 2 india

Specification
Brand : BGTEC
BulletPoint1 : 6MM*10 quick shank dry drill bit with double lugs.Total length 65mm with twist flutes.Suitable machines: Hand drill, Bench drill
BulletPoint2 : Dual-ear quick-release handle design: 6.35 mm diameter on the opposite side of the handle; less resistance during use.
BulletPoint3 : The top of the drill bit with spiral grooves: 8MM diamond high, spiral grooves help to drain and prevent flying chips from clogging, improve drilling efficiency;
BulletPoint4 : The drill bits contain cooling wax: they can be drilled dry without water, which is more convenient and at the same time reduces the environmental impact;
BulletPoint5 : Advanced vacuum brazing technology: offers a longer service life than electroplating (usually 3 to 5 times).
BulletPoint6 : Thin wall
BulletPoint7 : Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)
Color : Orange
CompatibleMaterial : Stone
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier1 : 045242105359
ExternallyAssignedProductIdentifier2 : 0045242105359
ExternallyAssignedProductIdentifier3 : 00045242105359
FinishType : Silver
GpsrSafetyAttestation : 1
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 8 inches
ItemDisplayDimensions_Width : 4 inches
ItemName : BGTEC Diamond Drill Bits Set Core Drill bit with Quick Change Hex Shank, 10pcs 1/4"" Tile Drill Bit for Ceramic Tile Porcelain Tile Marble Granite, Orange
ItemPackageDimensions_Height : 8.8 centimeters
ItemPackageDimensions_Length : 8.3 centimeters
ItemPackageDimensions_Width : 1.2 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : core-drill-bits
Manufacturer : BGTEC
Material : Diamond
ModelNumber : 48-20-5040
NumberOfFlutes : 1
NumberOfItems : 10
NumberOfPieces : 1
PackageLevel : unit
PartNumber : DBT3406U10
ProductDescription : Wet or dry; 2. Ensure that all forms of impact or hammering action are turned off. 3. Use the suction cup locator to accurately position the hole or place the drill at a 45 degree angle to drill until the drill begins to penetrate the material, then raise the drill to a vertical position and continue;
ProductSiteLaunchDate : 2023-11-27T13:57:20.294Z
Size : Set11(6MM*10)
Style : Thin Wall for SDS-PLUS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SurfaceRecommendation : Tile
SurfaceRecommendation1 : concrete
SurfaceRecommendation2 : wall
UnitCount : 10
UnspscCode : 27112800