Cart 2 india

Specification
Amperage : 18 amps
Brand : YEJMKJ
BulletPoint : Shihlin TH-P20E Thermal Overload Relay 15 A (12-18A)
BulletPoint1 : [Parameters]: Output Peak Current: 2.8~8.4A; Input Voltage: +24~110VDC (Typical +48VDC), 18~80VAC (Typical 60VAC); Logic Signal Current: 7~20mA (Typical 10mA); Pulse Input Frequency: 0~200kHz; Insulation Resistance: 500MΩ; Dimensions: 150x108x52mm / 5.91x4.26x2.05inch.
BulletPoint2 : [Compatibility]: The high subdivision stepper motor driver is compatible with Nema 34 stepper motors (2-phase hybrid stepper motors with outer diameters of 86mm).
BulletPoint3 : [Alarm Protection]: The stepper motor controller board has the function of over-voltage, over-current, overheat alarm protection; Through the serial port, the electronic gear ratio can be set (any subdivision) and the drive response time can be adjusted.
BulletPoint4 : [High Subdivision]: This stepper motor drive is equipped with 16 equal angle constant torque subdivisions, with a maximum resolution of 51200 steps/revolution, and can drive 4-wire, 6-wire, and 8-wire 2-phase stepper motors.
BulletPoint5 : [Good Service]: You will receive 1PCS stepper motor driver for Nema 34 stepper motor. If you encounter any problems in the process of using and purchasing, feel free to contact us via email anytime.
Color : Defult
ExternallyAssignedProductIdentifier : 4712795374513
ExternallyAssignedProductIdentifier1 : 0747607258587
ExternallyAssignedProductIdentifier2 : 747607258587
IncludedComponents : Nema 34 Stepper Motor Driver
ItemDisplayDimensions_Length : 2 inches
ItemDisplayWeight : 3.74 pounds
ItemName : YEJMKJ Digital Stepper Motor Driver, 2.8-8.4A 24-110VDC/18-80VAC 2 Phase CNC Stepper Driver for Nema 34 Stepper Motor, 3D Printer Stepper Motor Controller with Alarm Function for Carving Machines
ItemPackageDimensions_Height : 2.36 inches
ItemPackageDimensions_Length : 6.69 inches
ItemPackageDimensions_Width : 4.72 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : YEJMKJ
Material : Copper
ModelNumber : CN25
NumberOfItems : 1
OperationMode : Automatic
PartNumber : Nema34
PhaseType : Three Phase
ProductDescription : Digital Stepper Motor Driver, 2.8-8.4A 24-110VDC/18-80VAC 2 Phase CNC Stepper Driver for Nema 34 Stepper Motor, 3D Printer Stepper Motor Controller with Alarm Function for Carving Machines
ProductSiteLaunchDate : 2024-04-22T00:00:00.000-07:00
Size : default
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 33.9688
UnspscCode : 26111500
Voltage : 120 volts
Wattage : 1.4 kilowatts