Cart 2 india

Specification
Brand : SparkFun
BulletPoint1 : The TMC6300 from Trinamic is a powerful, yet easy to use three-phase brushless DC (BLDC) motor driver.
BulletPoint2 : It can be used to control any 3-phase BLDC or PMSM motor with up to 2A (1.4ARMS) of total drive current. Separate high-side and low-side control of the three half-bridges allows for incredible control of each phase of the motor commutation.
BulletPoint3 : Break Board Features: TMC6300 Motor Driver IC, Inputs: VS/GND - Power (2-11V) VCP - Charge Pump (for capacitor) VIO - I/O Logic Level/Standby Control, High-side and Low-side MOSFET pairs. UH/UL (PWM Input) VH/VL (PWM Input) WH/WL (PWM Input) Outputs: SEN - Current sense, DIAG - Diagnostic, Power Output from the three half-bridges. U/V/W (Motor Phase)
BulletPoint4 : The driver also provides temperature and short circuit protections, and a diagnostic output to indicate system faults.
BulletPoint5 : Our board layout has been designed with the LEDs and labels facing up, IC down. This allows the thermal pad on the board to be accessed if cooling is required. Additionally, the breakout pins are specially aligned to fit perfectly onto a breadboard and hold the headers more perpendicular to facilitate assembly.
ExternallyAssignedProductIdentifier1 : 0845156013401
ExternallyAssignedProductIdentifier2 : 845156013401
IncludedComponents : Qwiic
ItemName : SparkFun Brushless Motor Driver - 3-Phase (TMC6300) Brushless Gimbal Motor, high-Side and Low-Side Control, 1.8V Regulated Power Output, Board Dimensions: (in) 0.80 x 0.60
ItemPackageDimensions_Height : 5 millimeters
ItemPackageDimensions_Length : 25 millimeters
ItemPackageDimensions_Width : 20 millimeters
ItemTypeKeyword : electric-motor-controls
Manufacturer : SparkFun Electronics
Material : Copper
NumberOfItems : 1
PartNumber : ROB-21867
ProductDescription : The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM motor with up to 2A (1.4ARMS) of total drive current. Separate high-side and low-side control of the three half-bridges allows for incredible control of each phase of the motor commutation. The driver also provides temperature and short circuit protections, and a diagnostic output to indicate system faults. With a 1.8V regulated power output and an operating voltage down to 2V, the TMC6300 is suitable for low-power microcontroller and battery-powered designs (min. two AA/NiMh cells, or one to two Li-Ion cells).
Our board layout has been designed with the LEDs and labels facing up, IC down. This allows the thermal pad on the board to be accessed if cooling is required. Additionally, the breakout pins are specially aligned to fit perfectly onto a breadboard and hold the headers more perpendicular to facilitate assembly. Controlling 3-phase motors is not trivial and this board requires six PWM signals to fully control one motor.
ProductSiteLaunchDate : 2023-06-28T21:17:04.482Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39120000