Cart 2 india

Specification
Brand : RATTMMOTOR
BulletPoint : Diversitech 992 Boost Juice Inject
BulletPoint1 : 23HS2430B Nema23 Stepper Motor: Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires; Wirings: A+ to Red / A- to Green / B+ to Yellow / B- to Blue Motor Size: 57x57x112mm
BulletPoint2 : DM556S Stepper Motor Driver: Current: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC; Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise
BulletPoint3 : 4 Axis USB Mach3 Control Board: USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed. As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor
BulletPoint4 : 400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC; 75W 24V DC Switching power supply Input voltage: 100-240V AC; Output voltage: 24V; This 24V power supply is used to power the 4 axis usb mach3 control card
BulletPoint5 : Application: This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment
BulletPoint6 : 【Attention】Please Note: 1.The VFD can’t be used as a power source for other equipment, or to drive a motor with a supply voltage lower than 80V. 2.Do not connect the VFD’s output terminals with capacitive loads.3.Choose a VFD with a larger power output when operating heavy equipment like the crane and compressor, e.g.,a 5.5 Kw motor should be connected to a 7.5 Kw VFD. 4.If a generator is used to power the VFD, ensure that the generator's output voltage level is within +/-15%.
BulletPoint7 : 【Customer Service】Welcome to contact us if you have any questions of this product. Customer Support Team will help you as soon as we can in 24h.
Color : 74mm
Department : Women
ElectricalOutputWaveform : pure_sine_wave
ExternallyAssignedProductIdentifier : 6442698024991
ExternallyAssignedProductIdentifier1 : 0799128421179
ExternallyAssignedProductIdentifier2 : 799128421179
IncludedComponents : stepper motor/driver/board/cable/power supply
InverterCapacityVoltAmp : 750
ItemDisplayWeight : 0.06 pounds
ItemName : RATTMMOTOR USB 3 Axis Mach3 CNC Controller Kit,Nema23 Stepper Motor Driver CNC Kit,425oz-in 2.8Nm 3A,4 Axis CNC Motion Control Card USB Board+24V&36V DC Power Supply for CNC Router Engraving Machine
ItemPackageDimensions_Height : 29.21 centimeters
ItemPackageDimensions_Length : 20.32 centimeters
ItemPackageDimensions_Width : 28.702 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : Changzhou Rattm Motor Co.,Ltd
Material : Copper
Material1 : Plastic
Material2 : Aluminum
ModelName : MB55 Flex Mount Motor Bracket
ModelNumber : 35A16436NQ
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PackageLevel : unit
PartNumber : 3FDK-USB-B
PeakOutputPowerWatts : 750
PowerSourceType : 110v
ProductDescription :

Package include:

3 x 23HS2430B Nema23 stepper motor (Dual Shaft) 112mm,425oz-in,3A

3 x DM556S stepper motor driver DC24-50V,4.5A,256 high microstep

1 x 400W 36V DC 11A switching power supply

1 x 75W 24V DC switching power supply

1 x 4 Axis Blue USB Port Mach3 Motion Control Board

1 x USB cable

1 x CD disk

23HS2430B Nema23 Stepper Motor

Motor Type: Hybrid

Step Angle: 1.8 degree

Holding Torque: 425oz.in/2.8Nm

Rated Current/phase: 3A

Frame Size: 57 x 57 x 112 mm

Body Length: 112mm

Number of Leads: 4

Weight: 1.66kg

Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length

DM556S Driver

Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; 

Dial Switches

SW1-SW3: Set The Operating Current (1.0A-6.0A)

SW4 is a Half-Current function,when SW4=off,for half-current setttings,when SW4=on,current static state for full-current lock axis

SW5-SW8: Set the speed of subdivision and spontaneous pulses

4 Axis USB Mach3 board

Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives;

Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

Have 0-10V signal output,you can use mach3 software to control the spindle motor speed.

4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.

4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.

400W 36V DC Switching Power Supply

Model: S-400W-36V

Output Current:11A

Output Voltage:36V

Output Frequency:85%

Output Power: 400W

ProductSiteLaunchDate : 2023-07-24T09:02:00.677Z
RecommendedUsesForProduct : CNC router, Spindle motor, Workshop
Size : 4X1CM
Style : 3-Axis-USB-Mach3-C
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111700
Voltage : 36 volts
WarrantyDescription : 1 year
Wattage : 2.2 kilowatts