Cart 2 india

Specification
AgeRangeDescription : adult
Brand : RATTMMOTOR
BulletPoint : Very practical and convenient.
BulletPoint1 : 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
BulletPoint2 : 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "CLK-" connects to control card's XP pin , Driver's "CW-" connects to control card's XD pin , Driver's "5V" connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
BulletPoint3 : 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430B 2-phase stepper motor with dual shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
BulletPoint4 : 【Upgraded 4.5A Stepper Motor Driver】Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
BulletPoint5 : 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
BulletPoint6 : 【Multi-function control card】General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch and electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
BulletPoint7 : 【Stable output 24V DC power supply】Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
Color : Silver
Department : Unisex Adult
EducationalObjective : Imagination Development
ElectricalOutputWaveform : pure_sine_wave
ExternallyAssignedProductIdentifier : 8090776000047
ExternallyAssignedProductIdentifier1 : 701715516847
ExternallyAssignedProductIdentifier2 : 0701715516847
IncludedComponents : no
InputVoltage : 220 volts_of_alternating_current
ItemName : RATTMMOTOR 3 Axis CNC Controller Stepper Motor Kit, Nema23 Stepper Motor 270oz-in 3A Dual Shaft 23HS8430B, TB6600 Stepper Motor Driver, CNC Motion Control Board Mach3 USB Card, 24V Power Supply
ItemPackageDimensions_Height : 30.9118 centimeters
ItemPackageDimensions_Length : 17.0942 centimeters
ItemPackageDimensions_Width : 21.9964 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : RTM
ManufacturerMinimumAge : 48
Material : Aluminum
ModelName : AT1-1.5KW
ModelNumber : 4 Axis
NumberOfBoxes : 1
NumberOfItems : 12
OutputVoltage : 220 volts
PartNumber : FDKBLUE-ZK4
ProductDescription :

ProductSiteLaunchDate : 2022-03-14T07:00:00.000Z
RecommendedUsesForProduct : Spindle Motor Speed Control
Size : One Size
Style : 3ABLUE
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : unisex-children
Theme : Nature
TotalPowerOutlets : 1
UnitCount : 1
UnspscCode : 26111700
Voltage : 24 volts
WarrantyDescription : 1