Cart 2 india

Specification
Amperage : 1 amps
BatteriesRequired : 1
Brand : Azocek
BulletPoint : DC PWM Motor Controller: Our electric motor controller has a speed control and Forward-Brake-Reverse switch, the input voltage of the product is within the range of DC 12-60V and the applicable current is within 20A. PWM pulse width adjustable range: 0% - 100%, Voltage regulation range: 15KHZ
BulletPoint1 : Model:4 Axis GRBL 1.1F USB Port GRBL Control Board;ARM 32-Bit;Input voltage: 12-24V DC 5A.Equipped with 5 A4988 drive independent driver module, support upgrade to DRV8825.CNC Router Engraver Milling Machine Controller board.
BulletPoint2 : Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface; support 775 motor, 200W/300W/500W spindle; supportX/Y/Z/A four-axis drive, Y-axis dual drive. Support for rotary axis limit switch, Z-axis probe, emergency stop switch;5V/12V/24V constant voltage pin.
BulletPoint3 : Support stepper motor: within 2A maximum current, within 1.5A recommended[Nema17、Nema23（Max. 57 stepper motors)].Please check phase sequence when connecting the stepper motor, the phase sequence may be different for different motors, wrong connection may burn the motor a/nd the motherboard.
BulletPoint4 : Support software: LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender;Support external driver, external driver reserved interface with the market high-power driver consistent, convenient wiring.
BulletPoint5 : Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help.
BulletPoint6 : If you're using a computer with Versions higher than win8, you not need to install the driver files from the USB drive when connecting your control board. Simply ensure that your computer is connected to the internet when you connect the board, and the driver should automatically load. Note: This only applies to Versions higher than win8. If you're using an earlier version of Windows, you'll still need to install the driver from the USB drive.
BulletPoint7 : To protect novice and non-professional users, this control board has built-in protection programs that prevent firmware modification. Please confirm whether the board's features meet your requirements before purchasing.
Color : 2-PACK
CurrentRating : 15 amps
ExternallyAssignedProductIdentifier1 : 0696334086829
ExternallyAssignedProductIdentifier2 : 696334086829
IncludedComponents : 1* CNC Controller Control Board
ItemName : Power Battery Adapter with DC 12-60V Brush Forward/Reverse Motor Speed Controller Kit and Build-in Low-Voltage Protection Compatible with 18V Battery DIY Project
ItemPackageDimensions_Height : 13.208 centimeters
ItemPackageDimensions_Length : 12.9032 centimeters
ItemPackageDimensions_Width : 12.9032 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : Azocek
Material : Acrylonitrile Butadiene Styrene (ABS)
MaximumFrequency : 60 hertz
MinimumFrequency : 50 hertz
ModelName : 1
ModelNumber : CB-4Axis-3.0
NumberOfBoxes : 1
NumberOfItems : 1
OperatingTemperature : 80 degrees_celsius
PartNumber : CPS4KW
PhaseType : Three Phase
PowerSourceType : ac_dc
ProductDescription : Power Battery Adapter with DC 12-60V Brush Forward/Reverse Motor Speed Controller Kit and build-in Low-Voltage Protection
ProductSiteLaunchDate : 2024-06-06T07:00:00.000Z
SpecificationMet : CE
Style : Forward＆Reverse switch control
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111700
Voltage : 12 volts_of_direct_current
Wattage : 4 kilowatts