Cart 2 india

Specification
Brand : LUNYEE
BulletPoint : CNC Ethernet SmoothStepper for Mach3 / Mach4 CNC Smooth Stepper with Cable
BulletPoint1 : Nema 34 120MM Stepper Motor, great for 3D printer and DIY CNC
BulletPoint2 : Specification：8.2Nm holding torque，Current：6.0A,Step angle：1.8°，phase：2，Resistance：0.6±10%Ω，inductance：6.0±10%mH
BulletPoint3 : Size：Precisely machined full metal body. Frame Size: 86 x 86mm ,Body Length: 120mm ,Shaft Diameter: 14mm , Shaft Length: 31mm
BulletPoint4 : Connection: Black(A+), Green(A-), Red(B+), Blue(B-),30cm lead wire, 2-phase 4-wire, available for rotation of forward and reverse.
BulletPoint5 : Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.
CompatibleDevices : Mach3, Mach4
DataLinkProtocol : Ethernet
ExternallyAssignedProductIdentifier1 : 0680490993114
ExternallyAssignedProductIdentifier2 : 680490993114
HardwareInterface : ethernet
Horsepower : 21.6 watts
IncludedComponents : Nema 34 Stepper Motor
ItemName : NEMA 34 Stepper Motor 86x120MM 6.0A 8.2Nm for, Anycubic Mega Series DIY 3D Printers and CNC Extruder,CNC Router
ItemPackageDimensions_Height : 3.54 inches
ItemPackageDimensions_Length : 7.09 inches
ItemPackageDimensions_Width : 3.94 inches
ItemTypeKeyword : electric-motor-controls
Manufacturer : LUNYEE
Material : Copper
ModelNumber : NEMA 34-120MM
NumberOfItems : 1
PartNumber : NEMA 34-120MM
ProductDescription : Nema 34 120MM Stepper Motor, great for 3D printer and DIY CNC Specification：8.2Nm holding torque，Current：6.0A,Step angle：1.8°，phase：2，Resistance：0.6±10%Ω，inductance：6.0±10%mH Size：Precisely machined full metal body. Frame Size: 86 x 86mm ,Body Length: 120mm ,Shaft Diameter: 14mm , Shaft Length: 31mm Connection: Black(A+), Green(A-), Red(B+), Blue(B-),30cm lead wire, 2-phase 4-wire, available for rotation of forward and reverse. Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2023-11-17T06:34:46.049Z
Speed : 6 amps
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26100000
Voltage : 3.6 volts