Cart 2 india

Specification
Brand : LYDODOKA
BulletPoint : Motors
BulletPoint1 : 【Parameter Details】Input voltage range 110-120V, maximum current capacity 15A, rated current 9A. . It supports a maximum resistive load of 4000W and an inductive load of 1500W.
BulletPoint2 : 【Overload Protection Switch】When the current exceeds 15A, the switch automatically cuts off the power supply to ensure the safety of the equipment and users. Flame-retardant casing provides an extra layer of protection.
BulletPoint3 : 【LED Voltage Display】It features back clip, allowing you to easily attach it to your belt while working. The knob provides precise voltage control, while the LED voltage display ensures easy monitoring.
BulletPoint4 : 【Standard Outlet】The product has a standard outlet on the bottom that is compatible for Type A and Type B plugs commonly used in the United States.
BulletPoint5 : 【Widely Uses】Our AC motor speed controller is suitable for small motors, fans, soldering irons, and other inductive load equipment. It can be used with resistive loads such as kettles and electric heaters. Note: Products with built-in circuit boards and electronic components cannot be used, such as induction cookers, energy-saving lamps and brushless synchronous motors.
Color : Black
ExternallyAssignedProductIdentifier : 5469228753436
FinishType : Finish
IncludedComponents : 1× Switch, 1× Hook, 1× Instruction Manual
ItemName : LYDODOKA AC Motor Speed Controller, US-110-120V 15A 4000W Electric Fan Speed Regulator with Overload Protection Switch, Precise Variable Speed Controller for Fan Small Motor, Black
ItemPackageDimensions_Height : 21.6 centimeters
ItemPackageDimensions_Length : 16.4 centimeters
ItemPackageDimensions_Width : 20.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : BENGTING
Material : Acrylonitrile Butadiene Styrene (ABS)
ModelName : BQTYDYZR
ModelNumber : Variable Speed Controller
NumberOfItems : 1
PartNumber : Fan Speed Controller
PowerSourceType : PowerSource
ProductDescription :

Detailed description:

Parts List:

1× Switch

1× Hook

1× Instruction Manual

Instructions:

Before use, adjust the knob to the "0" position, connect the product power cord to the AC 110V socket, and the output voltmeter displays the voltage (the voltage displayed when no load is a virtual voltage, and a load must be connected to measure the correct voltage). Connect the device to the output socket and slowly adjust the knob clockwise to increase the voltage and counterclockwise to decrease the voltage.

Precautions:

The peak power of the module of this product is 4000W. The maximum power of the resistive load connected to the power connector shall not exceed 2000W, the maximum power of the inductive load shall not exceed 500W, and the maximum power of the capacitive load shall not exceed 300W, otherwise the product may be damaged. For fans with power above 550W, the speed should be adjusted at least half the speed. For electrical appliances with power above 1000W, turn the knob to 0 when not in use to avoid excessive instantaneous starting current and damaging the regulator the next time you start it.

Specification:

Product Name: Variable Fan Speed Controller

Product Material: ABS

Input Voltage Range: 110-120V

Maximum Current Capacity: 15A

Rated Current: 9A

Wire Length: 1m

Size: 12× 6.5× 5.5cm/ 4.72× 2.55× 2.16 inch

Plug Standard: US

Notes:

1.There may be slight differences between the picture and the actual color of the commodity. We will try our best to show you the exact color.

2.Please allow slight dimension difference due to manual measurement.

ProductSiteLaunchDate : 2024-05-30T09:45:30.256Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111700
Voltage : 110 volts
Wattage : 4000 watts