Cart 2 india

Specification
Brand : Hilitand
BulletPoint1 : APPLICATION: ZVS coil drive board, high voltage heating module, widely used in for Marx generators and high voltage inverter power supplies, etc.
BulletPoint10 : 9. Open/closed loop control setting Open/closed loop control is selected via SW2. 0N=closed-loop control; 0FF=Open loop control. Note: During closed-loop control, please set sV according to the corresponding motor pole pairs.Note: During closed-loop control, please set sV according to the corresponding motor pole pairs.
BulletPoint2 : EASY : The heating board module has compact structure, with standard size, easy installation and wiring, suitable for many DIY heating device.
BulletPoint3 : EXCELLENT PARTS: Using resistors, has high accuracy and stable performance, and additional power wire tinned, has strong current carrying capacity.
BulletPoint4 : STABLE PERFORMENCE: With 30mm large heat sink design, which has good heat dissipation effect, can greatly improve product stability and service life.
BulletPoint5 : WIDE VOLTAGE RANGE: The driver board is designed with excitation magnetic circuit, the input voltage range is 12V‑30V, and the application range is wide.
BulletPoint6 : 5. Brakingthe motor runs when the low level is added or EN and BRK are connected The motor brake stops when a high level is added or port suspension;
BulletPoint7 : 6. Peak current settingEquipped with a motor protection function, the driver provides options to set desired current number in the P-sv knob. Please note that the rate of change is ±10% .
BulletPoint8 : 7.Acceleration/deceleration time setting Set the acceleration time and deceleration time of the motor through the potentiometer ACC/DEC The acceleration and deceleration time can be increased or decreased by rotating ACC/DEC left or right. Setting range: 0.3-15s The acceleration time is the time required for the motor to reach the rated speed from the static state, The deceleration time is the time required for the motor to stop from the rated speed.
BulletPoint9 : 8. Motor pole number setting In order to better match the brushless DC motor with different pole pairs, The number of poles of the motor can be set via SW1. ON=2P; OFF=4P Note: During closed-loop control, please set SW1 according to the corresponding motor pole pairs.
CircuitBreakerType : Standard
Color : White
CurrentRating : 25 amps
ExternallyAssignedProductIdentifier1 : 0722487865223
ExternallyAssignedProductIdentifier2 : 722487865223
Horsepower : 60 watts
IncludedComponents : Manual AC Contactor
ItemName : High Voltage Coil Driver Board, ZVS Driver Board, 12 to 30V High Voltage Coil Heating Board Module Excitation Circuit Design
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : electric-motor-controls
Manufacturer : Hilitand
Material : copper
MaximumFrequency : 60 hertz
MinimumFrequency : 60 hertz
ModelName : Hilitand5xt71d3zym
ModelNumber : Hilitand5xt71d3zym
MountingType : DIN Rail Mount
NumberOfItems : 1
NumberOfPoles : 2
PartNumber : Hilitand5xt71d3zym
PowerSourceType : Corded Electric
ProductDescription : Specification:
Item Type: ZVS Driver Board
Material: PCB
Application: Heating Module
Input Voltage: 12-30V
Current: ?10A

Package List:
1 x Driver Board
ProductDescription1 : Features:QW-BLD-300 is a high performance 3-phase BLDC motor controller.Voltage range is from 12VDC to 56VDC. The controller can drive the DLDC motor with HALL . The driver is based on advanced technology and be provided with high speed, high , low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output, positive negative rotation control etc. This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc. External potentiometer control/external voltage control. With overvoltage protection, over-current protection, locked-rotor protection.
ProductDescription2 : Specifications:Rated voltage: 12 to 56VDC Rated current: 15A Current limiting: 18A Maximum speed: 20000RPM( the specific speed depends on the motor itself and load) Storage temperature: 0℃~+50℃ Usage environment: Avoid direct contact with dust, fumes and corrosive gases Temperature: 10℃-45℃ Humidity: < 90%, no frost, frost free Shock: 5.7m/S2 Maximum Storage humidity: 0~90%RH Size: Approx. 9.6 x 6 x 2.46cm / 3.78 x 2.36 x 0.97inch Weight: 350g
ProductSiteLaunchDate : 2023-07-17T07:59:26.868Z
Size : 15W
SpecificationMet : Labs
Speed : 1500 rpm
Style : 110V
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31160000
Voltage : 110 volts_of_alternating_current
Wattage : 60 watts