Cart 2 india

Specification
Brand : Focket
BulletPoint1 : Adjusted manually,the regulator is more easy to use.
BulletPoint10 : 9. Open/closed loop control setting Open/closed loop control is selected via SW2. 0N=closed-loop control; 0FF=Open loop control. Note: During closed-loop control, please set sV according to the corresponding motor pole pairs.Note: During closed-loop control, please set sV according to the corresponding motor pole pairs.
BulletPoint2 : The maximum output current is 20A and the capacity (KVA) is 2.
BulletPoint3 : High efficiency, no waveform distortion,higher stability.
BulletPoint4 : Since the voltage regulator has good heat dissipation capacity,therefore it has long service life.
BulletPoint5 : Widely applicable to science labs, audiophiles (old tube amplifiers), science labs, hobbies, film and video lighting applications.
BulletPoint6 : 5. Brakingthe motor runs when the low level is added or EN and BRK are connected The motor brake stops when a high level is added or port suspension;
BulletPoint7 : 6. Peak current settingEquipped with a motor protection function, the driver provides options to set desired current number in the P-sv knob. Please note that the rate of change is ±10% .
BulletPoint8 : 7.Acceleration/deceleration time setting Set the acceleration time and deceleration time of the motor through the potentiometer ACC/DEC The acceleration and deceleration time can be increased or decreased by rotating ACC/DEC left or right. Setting range: 0.3-15s The acceleration time is the time required for the motor to reach the rated speed from the static state, The deceleration time is the time required for the motor to stop from the rated speed.
BulletPoint9 : 8. Motor pole number setting In order to better match the brushless DC motor with different pole pairs, The number of poles of the motor can be set via SW1. ON=2P; OFF=4P Note: During closed-loop control, please set SW1 according to the corresponding motor pole pairs.
CurrentRating : 20 amps
ExternallyAssignedProductIdentifier1 : 0722487865223
ExternallyAssignedProductIdentifier2 : 722487865223
Horsepower : 60 watts
IncludedComponents : Speed controller
ItemName : Focket Automatic Voltage Regulator, TDGC2-2KM AC 110V 2000W 20A Voltage Transformer Voltage Converter Transformer Motor Speed Controller with US Outlet, Circuit Breaker
ItemPackageDimensions_Height : 21 centimeters
ItemPackageDimensions_Length : 27 centimeters
ItemPackageDimensions_Width : 24 centimeters
ItemShape : Rectangular
ItemTypeKeyword : electric-motor-controls
Manufacturer : Focket
Material : iron
MaximumFrequency : 60 hertz
MinimumFrequency : 60 hertz
ModelName : Electric Gear Motor
ModelNumber : Focketbhtsro50vw
NumberOfItems : 1
PartNumber : Focketbhtsro50vw
PowerSourceType : Corded Electric
ProductDescription : Spec:
Item Type:Voltage Regulator
Model: TDGC2-2KM
Rated Power: 2000W
Output Voltage: AC0-130V, 60Hz
Maximum Output Current: 20Amps
Power Phase Number: Single Phase
Proof: Open
Cooling Method: Cooling
Iron Core Form: Ring
Plug:US Plug AC110V, 60Hz
Power Cord Length:137cm / 53.94in
Size:11 x 14 x 14.5cm / 4.33 x 5.51 x 5.71in

packing list:
1 x AC Regulator
1 x Users Manual(English)
2 x

Note:
Please kindly make a note if you need any plug adapter.

ProductDescription1 : Features:QW-BLD-300 is a high performance 3-phase BLDC motor controller.Voltage range is from 12VDC to 56VDC. The controller can drive the DLDC motor with HALL . The driver is based on advanced technology and be provided with high speed, high , low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output, positive negative rotation control etc. This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc. External potentiometer control/external voltage control. With overvoltage protection, over-current protection, locked-rotor protection.
ProductDescription2 : Specifications:Rated voltage: 12 to 56VDC Rated current: 15A Current limiting: 18A Maximum speed: 20000RPM( the specific speed depends on the motor itself and load) Storage temperature: 0℃~+50℃ Usage environment: Avoid direct contact with dust, fumes and corrosive gases Temperature: 10℃-45℃ Humidity: < 90%, no frost, frost free Shock: 5.7m/S2 Maximum Storage humidity: 0~90%RH Size: Approx. 9.6 x 6 x 2.46cm / 3.78 x 2.36 x 0.97inch Weight: 350g
ProductSiteLaunchDate : 2023-05-25T04:57:22.533Z
SpecificationMet : Labs
Speed : 1350 rpm
Style : 4 piece BLD-300
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 110 volts
Wattage : 60 watts