Cart 2 india

Specification
Amperage : 34 amps
Brand : AEOTEC
BulletPoint1 : Install invisibly with the motor to control wirelessly via Z-Wave network, and automate it with your smart home scenes.
BulletPoint2 : Works with single-phase AC asynchronous motor, 2.5 amps max load input, neutral required for installation.
BulletPoint3 : Works with existing panel switches and WallSwipe for controlling, WallSwipe is sold separately.
BulletPoint4 : Compatible with certified Z-Wave gateways including: SmartThings, Wink Hub, Open Z-Wave, Homeseer HS3, Homeseer, eedomus, Domoticz and more.
BulletPoint5 : Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056124.
Color : White
ConnectivityTechnology : Bluetooth
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 810667024031
ExternallyAssignedProductIdentifier2 : 0810667024031
Horsepower : 120 watts
IncludedComponents : Gear Motor +Governor
ItemDisplayDimensions_Height : 1.65 centimeters
ItemDisplayDimensions_Length : 1.85 centimeters
ItemDisplayDimensions_Width : 1.69 centimeters
ItemName : Aeotec Nano Shutter, Z-Wave Plus Controller Automatic Blinds Curtains, Shades, Gates, Smart Blinds Invisible Installation
ItemPackageDimensions_Height : 7.4 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 7.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : Aeotec
Material : copper
MaximumRange : 150 meters
ModelName : gear
ModelNumber : ZW141-A
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PartNumber : ZW141-A
PhaseType : 1-phase,single phase
ProductDescription :

Package include:  

4 x TB6560 MD430 single axis driver

4 x 23HS8430B stepper motor 76mm 270oz-in dual shaft 

1 x 350W 24V DC switching power supply

1 x 5 axis breakout board  

1 x DB25 parallel cable

1 x USB cable

English user manual for breakout board and stepper motor driver will send by email. TB6560 MD430 Low noise of stepper motor driver 

1. Introduction

MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth--S3/S4), torque (100%, 75%, 50%, 20%--S5/S6) ,work current (0-3A--SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%). MD430-HZ

2. Features

1) Single-chip motor driver for sinusoidal microstep control of stepping motors

2) Power on in indication led

3) 3Amps-34Volts(Supply voltages:12-34DC)

4) Full step, half step, eight step and sixteenth step(selection with dipswitches)

5) Torque (100%, 75%,50%, 20%)

6) Work Current (0-3A selection with SW1/SW2/SW3)

5 axis CNC Breakout board interface adapter board 

full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control;

Stepper Motor

General Specification:

Step angle accuracy:+ -  5%(full step,not load)

Resistance accuracy: + - 10%

Inductance accuracy:+ - 20%

Temperature rise: 80deg Max(rated current,2 phase on)

Ambient temperature ----------—20deg  ----  +50deg

Insulation resistance:100ohm  Min,500VDC

Insultion Strength--------500VAC for one minute

Datasheet (23HS8430B,front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque)

Switching power supply

350W 24V/10 A,single output switching power supply

ProductSiteLaunchDate : 2018-08-27T07:00:00.000Z
RegulatoryComplianceCertification : RSDOS.0565GA-006
Size : Small
SpecificationMet : UL
Speed : 33 rpm
Style : Automatic
SupplierDeclaredDgHzRegulation : not_applicable
SupportedDevicesQuantity : 1
UnitCount : 1
UnspscCode : 52161500
Voltage : 120 volts