Cart 2 india

Specification
Brand : hiBCTR
BulletPoint : 2.5A-4A
BulletPoint1 : Application This product is widely applicable to speed regulation of DC motors, fans, fish tank oxygen pump, and other DC 1.8V - 12V products.
BulletPoint2 : Motor Speed Controller It is an ultra - low - voltage DC motor speed controller with the chip model NE555, a potentiometer with switch function, and a 2A resettable fuse to protect the controller, along with a power - on indicator.
BulletPoint3 : High - performance The input power supply voltage is DC 1.8V - 12V. The maximum continuous output current is 2A, the maximum output power is 30W, and the duty cycle can be adjusted from 0% to 100%.
BulletPoint4 : Safety The speed controller is equipped with a self - restoring fuse. When the current is too high, the fuse will automatically disconnect. After cooling, the fuse will automatically restore.
BulletPoint5 : Precautions Please connect this DC controller to a DC power supply. Do not directly connect it to a household 220V AC power supply, otherwise it will be damaged. The power supply voltage should not be greater than 15V. This is a 2A high - current speed controller. It cannot drive a continuous current greater than 0.5A for continuous operation, such as for 775 motors or children's car motors. Please confirm again before purchasing.
CircuitBreakerType : Standard
Color : Gray
CurrentRating : 4 amps
EngineType : electric engine
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier : 7383329623093
ExternallyAssignedProductIdentifier1 : 0605556834200
ExternallyAssignedProductIdentifier2 : 605556834200
FuelType : electric
GpsrSafetyAttestation : 1
IncludedComponents : 1 X DC Speed Controller
InternationalProtectionRating : IP55
IsAssemblyRequired : 1
ItemName : 6 Pieces PWM Low-Voltage Motor Speed Controllers, Model 1803BK/1803B, for DC 1.8V/3V/5V/6V/12V Input Voltage and a Maximum Output Current of 2A.
ItemPackageDimensions_Height : 10 millimeters
ItemPackageDimensions_Length : 36 millimeters
ItemPackageDimensions_Width : 18 millimeters
ItemPackageQuantity : 6
ItemTypeKeyword : electric-motor-controls
Manufacturer : hiBCTR
Material : metal
MaximumHorsepower : 3 horsepower
ModelName : Narootee3b9w0dn8p
ModelNumber : Narootee3b9w0dn8p
MountingType : Screw Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPoles : 3
OperationMode : Electric
PackageLevel : unit
PartNumber : H1-HBB0034-6
ProductDescription :
Specifications

Chip Model: NE555

Input Power Supply Voltage: 1.8V - 12V DC

Maximum Output Power: 30W

Maximum Continuous Output Current: 2A

Adjustable Duty Cycle: 0% - 100%

Dimensions: Approximately 32 x 32 x 14 mm

Precautions

Please connect this DC controller to a DC power supply. Do not directly connect it to a household 220V AC power supply, as it will cause damage. The power supply voltage should not exceed 15V; otherwise, damage will occur.

This is a speed regulator with a high current of 2A. However, it cannot drive a continuous current greater than 0.5A for continuous operation, such as for 775 motors or children's car motors. Please double-check before purchasing.

ProductSiteLaunchDate : 2024-12-25T00:00:00.000-08:00
RecommendedUsesForProduct1 : For Fresh Water
Size : PVF090 14mm Input
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 690 volts
WarrantyDescription : 2 year limited warranty