Cart 2 india

Specification
Brand : LCRHLCNC
BulletPoint : Application:for Columbia Par Car 1987 and newer 74883-87
BulletPoint1 : Package include：1 pcs DM542 stepper motor driver
BulletPoint2 : Specification：input voltage：20-50VDC,out current：1-4.2A,MAX power：200w，subdivision：2/4/8/16/32/64128/5/10/20/25/40/50/100/125，temperature：-10-50°C
BulletPoint3 : application：suit for Nema 17, Nema 23 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).
BulletPoint4 : Product features:Strong anti-interference ability. With over current protection and over-voltage protection
BulletPoint5 : 100% service satisfactory. 30 days free replacement or refund, Three Month warranty and whole life customer service from the date of purchasing.
ExternallyAssignedProductIdentifier : 8425511847494
ExternallyAssignedProductIdentifier1 : 886102653883
ExternallyAssignedProductIdentifier2 : 0886102653883
Horsepower : 200 watts
IncludedComponents : 1 x DM542 stepper motor driver
ItemName : 3D Printer CNC Microstep Driver DM542 Stepper Motor Controller 2-Phase Digital Stepper Motor Driver 20-50V DC Max 4.2A for Nema 17, Nema 23 Stepper Motor
ItemPackageDimensions_Height : 19.7104 centimeters
ItemPackageDimensions_Length : 4.9022 centimeters
ItemPackageDimensions_Width : 10.2108 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : Lishui Hengli Automation Technology Co., Ltd.
Material : Copper
ModelName : gear
ModelNumber : 74883-87
NumberOfItems : 1
PartNumber : DM542
ProductDescription : 1. Electrical parameters: Input voltage: DC 24～50V input Output current: less than 4 amperes Output current: 1.0A～4.2A Power consumption: power consumption: 80W; internal insurance: 6A Temperature: working temperature -10～50℃; storage temperature -40℃～70℃ Humidity: no condensation, no water droplets Gas: non-flammable gas and conductive dust Weight: 250 grams 2. Control signal interface: 1. Definition of control signal PLS+: Step pulse signal input positive terminal or positive step pulse signal input positive terminal PLS-: Step pulse signal input negative terminal or positive step pulse signal input negative terminal DIR+: Step direction signal input positive terminal or reverse step pulse signal input positive terminal DIR-: Step direction signal input negative terminal or reverse step pulse signal input negative terminal ENA+: Offline enable reset signal input positive terminal ENA-: Offline enable reset signal input negative terminal When the offline enable signal is valid, the drive fault is reset, any valid pulse is prohibited, the output power element of the drive is turned off, and the motor has no holding torque 2. Control signal connection The control signal of the host computer can be effective at high level or at low level. When high is effective, connect the negative ends of all control signals together as the signal ground, when low, connect the positive ends of all control signals together as the signal common end. Now take the open collector and PNP output as an example, the interface circuit diagram is as follows: Drive wiring: A complete stepper motor control system should contain stepper drives, DC power supplies and controllers (pulse sources). The following is a typical system wiring diagram:
ProductSiteLaunchDate : 2022-07-15T03:15:44.395Z
Speed : 300 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 36 volts
Wattage : 0.63 kilowatts