Cart 2 india

Specification
Brand : Mcbazel
BulletPoint1 : PL259 Male Plug DC to 1GHz 100 Watt Dummy Load 50 Ohm Dummy Load
BulletPoint2 : Max input power: 100 Watt. Frequency Range: DC to 1GHz.
BulletPoint3 : Connector: PL259. Impedance: 50ohm.
BulletPoint4 : Size: 58 x 78 mm (NOT include plug)
BulletPoint5 : The total length is about 21mm, the inner diameter is about 5.5mm, the needle diameter is about 2.1mm, and the thread length is about 5mm. 5.5mm x 2.1mm female DC power socket panel installation is applicable to small TV and more small electronic equipment.
Color : Black
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 713239955361
ExternallyAssignedProductIdentifier2 : 0713239955361
ExternallyAssignedProductIdentifier3 : 5509005541310
ExternallyAssignedProductIdentifier4 : 0702658168605
ExternallyAssignedProductIdentifier5 : 7336117832139
ExternallyAssignedProductIdentifier6 : 6927082514666
ExternallyAssignedProductIdentifier7 : 7785004568048
ExternallyAssignedProductIdentifier8 : 0700443088909
Impedance : 50 ohm
ItemName : Mcbazel Surecom 0014-0156 PL259 Male Plug DC to 1.0GHz 100W Watt 50 Ohm Dummy Load
ItemPackageDimensions_Height : 17.7 centimeters
ItemPackageDimensions_Length : 8.6 centimeters
ItemPackageDimensions_Width : 9.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronics-cable-connectors
Manufacturer : Surecom
ModelNumber : 0014-0156
NumberOfItems : 1
PartNumber : 0014-0156
ProductDescription : Description:
PL259 Male Plug DC to 1GHz 100 Watt Dummy Load 50 Ohm Dummy Load

Max input power: 100 Watt
Frequency Range: DC to 1GHz
Connector: PL259
Impedance: 50ohm
Size: 58 x 78 mm (NOT include plug)

Warning:
When the input power is higher than the dummy provides , it will cause the damage of the product

Why use the dummy load?
A Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves.

The Dummy Load is selected in a way so that it has a similar impedance to the real device that will be connected to the RF System.Not using a dummy load and leaving the port open, can result in some unwanted reflections which can damage the RF System. Also, using a real antenna in the testing phase can result in some unwanted transmission in the lab which will interfere with other devices and technologies being tested.

Packing Includes:
1 x 100W DC-1GHz 50ohm Dummy Load
ProductSiteLaunchDate : 2016-11-04T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43221700