Specification Brand : uxcell BulletPoint1 : Fit Pipe Diameter: 63mm / 2.48"; Punch Diameter: 12mm / 0.47"; Thread Length: 75mm / 2.95"; Total Length: 180mm / 7.09"; Package Content: 5 x U-shaped Pipe Clamp with Expansion Screw Sets BulletPoint2 : Material: Carbon steel material, surface zinc plated finish, rust and corrosion resistant, acid and alkali resistant, heat and cold resistant, can be used for a long time. BulletPoint3 : Design: U-shaped bolt pipe clamp with expansion screw bracket, the combination of the two can better tighten the various off-wall laying pipes, expansion design is suitable for concrete and masonry. BulletPoint4 : Usage: Drill a hole in the wall, put the expansion bolt into the hole, and tighten the hex nut until the expansion screw cannot be pulled out. Fix the U-shaped bolt on the pipe, connect it with the expansion rod, and then fix it with hex nuts. BulletPoint5 : Application: Suitable for gas, water pipes, and other off-wall laying pipes, widely used indoors and outdoors, bathrooms, kitchens, gardens, and so on. Color : Grey Color1 : Orange Color2 : Dark Gray CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier1 : 709016617379 ExternallyAssignedProductIdentifier2 : 0709016617379 FinishType : Painted IncludedComponents : Electrical box InstallationType : Screw-In ItemName : uxcell U-bolt Pipe Clamp with Expansion Screw, 5pcs Fit 2-1/2"(63mm) Pipe Supports, 180mm Long Adjustable Pipe Bracket for Gas Pipeline ItemPackageDimensions_Height : 1.18 inches ItemPackageDimensions_Length : 8.27 inches ItemPackageDimensions_Width : 3.94 inches ItemShape : Rectangle ItemTypeKeyword : conduit-mounts Manufacturer : uxcell Material : carbon ModelNumber : DQXDSX PartNumber : a23063000ux0256 Pattern : Clear Cover ProductDescription : Description: 1. Material: Carbon steel material, surface zinc plated finish, rust and corrosion resistant, acid and alkali resistant, heat and cold resistant, can be used for a long time. 2. Design: U-shaped bolt pipe clamp with expansion screw bracket, the combination of the two can better tighten the various off-wall laying pipes, expansion design is suitable for concrete and masonry. 3. Usage: Drill a hole in the wall, put the expansion bolt into the hole, and tighten the hex nut until the expansion screw cannot be pulled out. Fix the U-shaped bolt on the pipe, connect it with the expansion rod, and then fix it with hex nuts. 4. Application: Suitable for gas, water pipes, and other off-wall laying pipes, widely used indoors and outdoors, bathrooms, kitchens, gardens, and so on.