Cart 2 india

Specification
Brand : Thomas & Betts
BulletPoint : Thomas & Betts/Carlon 1/2X10 Nm Flex Conduit 12005-UPC
BulletPoint1 : Creates electrical bond between a copper ground wire and water pipes or service masts
BulletPoint2 : Attaches to 1/2” to 2” diameter pipe
BulletPoint3 : UL Listed
BulletPoint4 : 【Multiple sizes】Multiple sizes adjustable, cable diameter:1/8"-1/4"(PG7),5/32"-5/16"(PG9),3/16"-3/8"(PG11),1/4"-15/32"(PG13.5),3/8"-9/16"(PG16),15/32"-5/8"( PG19)
BulletPoint5 : 【After-sales】Only 4 steps are needed to complete the installation, 1. Determine the hole diameter. 2. Determine the cable diameter. 3. Choose the right model. 4. Open the nut, pass through the nut and the waterproof connector, and then tighten it. When you have a problem, we will reply you and help you solve it within 12 hours.
BulletPoint6 : EASY USE: Aluminum wire connectors allow easy re-entry for changes, inspection, or troubleshooting
Color : Blue
Color1 : Black
Color2 : Green
ConnectorType : Dual Entry Insulated
CustomerPackageType : 1
ExternallyAssignedProductIdentifier1 : 034481231653
ExternallyAssignedProductIdentifier2 : 0034481231653
ExternallyAssignedProductIdentifier3 : 00031857493264
IncludedComponents : 1
InstallationType : Screw-In
ItemDepth : 10 inches
ItemDisplayWeight : 0.1 pounds
ItemName : Carlon 12005-upc Non-metallic Flex Conduit, 1/2" X 10'
ItemPackageDimensions_Height : 302.26 centimeters
ItemPackageDimensions_Length : 1.905 centimeters
ItemPackageDimensions_Width : 1.905 centimeters
ItemPackageQuantity : 1
ItemShape : Triangle
ItemTypeKeyword : conduit-fittings
Manufacturer : THOMAS & BETTS/CARLON
Material : PVC
MaximumVoltage : 600 volts
MeasurementSystem : Inch
ModelName : 12005UPC
ModelNumber : 12005UPC
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 12
OperatingVoltage : 600 volts
PackageLevel : unit
PartNumber : 12005UPC
ProductDescription : EZ Flex Flexible ENT Electrical Nonmetallic Tubing is a high performance low cost alternative to electrical metallic tubing. EZ Flex not only costs less than metal tubing, but installation time is dramatically reduced, saving expensive labor cost. Since the corrugated design allows bending by hand, it eliminates the need for bending equipment and/or special tools. Reduced inner surface area cuts down on drag so that wire pulling is accomplished easier and faster. EZ Flex is used in circuits of 600 volts or less. The minimum installation temperature is -4?F (-20?C) and maximum ambient temperature is 122?F (50?C).
ProductSiteLaunchDate : 2006-12-04T19:51:11-00:00
Size : 8 Inch
SkipOffer : 1
SpecificationMet : cUL
SpecificationMet1 : CE
SpecificationMet2 : SAA
SpecificationMet3 : TUV
SpecificationMet4 : IP68
StudSize : #14-#2
Style : Straight
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TemperatureRating : 194 degree fahrenheit
TerminalType : Spade Terminal
UnitCount : 1
Voltage : 600 volts