Cart 2 india

Specification
Brand : ITW Buildex
BulletPoint1 : Material: The concrete screw is made of Q235 carbon steel, with high hardness, galvanized surface, and corrosion resistance.
BulletPoint2 : Application: Suitable for heavy loads such as solid concrete, stones, bricks, etc.
BulletPoint3 : Durable: Flange hexagonal washer head with anti rotation serrations, safe and secure.
BulletPoint4 : Size: 1/2 "x 4-3/4".
BulletPoint5 : Packaging: 10 concrete screws in total.
Color : Silver
CustomerPackageType : Standard Packaging
DriveSystem : Phillips
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 092097909540
ExternallyAssignedProductIdentifier2 : 0092097909540
ExternallyAssignedProductIdentifier3 : 00707392637011
GradeRating : Industrial
ItemName : Red Head ITW 1/4" x 2-3/4" SPF4-234 410 Stainless Steel Flat Phillips Tapcon
ItemPackageDimensions_Height : 14.7 centimeters
ItemPackageDimensions_Length : 7.8 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : concrete-screws
Manufacturer : ITW/Buildex
Material : Stainless Steel 410
Material1 : Zinc
Material2 : Carbon Steel
MaximumShearStrength : 1,200 lbf
MeasurementSystem : Imperial
MetalType : Stainless Steel
MetalType1 : Zinc
MetalType2 : Alloy Steel
ModelNumber : 11413
NumberOfItems : 1
NumberOfPieces : 10
PartNumber : TCFS14234
ProductDescription : Applications: The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick. Environment: The anchor is designed for use in a Moist environment. Head Style: The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Hole Diameter/Bit Diameter: The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required: A #3 is required for driving the anchor into the base material. Diameter of Anchor: The diameter of the anchor is 1/4". Length Anchor: The length of the anchor is 2-3/4". Thread Length: The length of the threads on the anchor is 1-3/4" in length. Minimum Embedment: The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete. Maximum Fixture Thickness: The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4". This will ensure that the minimum embedment of 1" will be met. Fixture Hole Diameter: The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16". Spacing between Anchors: Each anchor must be spaced a minimum distance of 4" from each other when measured center to center. Edge Distance: It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2017-08-24T07:00:00.000Z
Size : 1/4"
Style : Machine Screw Anchor Setting Tool
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500