Cart 2 india

Specification
Brand : Legion
BulletPoint1 : SCOPE OF APPLICATION: SSD copper heat sink for Steam Deck and for ROG ALL , the installation is more convenient and easy, easy to meet your usage needs.
BulletPoint2 : HEAT DISSIPATION: SSD heatsink thermal pad is made of pure copper material, which is not only very , but also has good heat dissipation performance to improve gaming experience.
BulletPoint3 : INCLUDED: Includes 1 x 0.5mm / 0.02in Copper Heatsink, 2 x 0.13mm / 0.01in Phase Change Thermal Pads, 3 x 0.5mm / 0.02in Silicone Thermal Pads, 1 x Screwdriver, 1 x Split Pry Bar, 1 x Triangular Pry Tool, 18 x Screws.
BulletPoint4 : PHASE CHANGE THERMAL PAD: Phase change silicone thermal pad not only improves heat dissipation, but also flattens the SSD to avoid bumping the cover.
BulletPoint5 : STABLE : Thermal copper sheet aids in passive heat dissipation, plus the high performance thermally conductive silicone sheet absorbs solid heat onto the top of the copper sheet, which quickly removes heat through the laptop's internal fan.
Color : Black
CoolerHeatsinkCompatibility : Steam Deck, ROG ALL
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6091022469436
ExternallyAssignedProductIdentifier1 : 0198715654943
ExternallyAssignedProductIdentifier2 : 198715654943
GpsrSafetyAttestation : 1
IncludedComponents : HubSinks
ItemName : HubSink V2 E-Bike Hub Motor Heatsink for Improved Cooling and Performance (QS205)
ItemPackageDimensions_Height : 19.5072 centimeters
ItemPackageDimensions_Length : 7.112 centimeters
ItemPackageDimensions_Width : 16.2052 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangle
ItemTypeKeyword : desktop-computer-heatsinks
Manufacturer : HubSink
Material : Aluminum
ModelNumber : QS205
MountingType : PCB Mount
NumberOfItems : 1
PartNumber : HubSink V2
ProductDescription : Spec:
Item Type: For Steam Deck SSD Heatsink Thermal Pad
Material: Copper, Silicone
Heat Dissipation Copper Sheet Size: Approx. 26 x 23 x 0.5mm / 1.02 x 0.91 x 0.02in
Compatible Brands: For Steam Deck, For ROG ALL
Applicable Hard Disk: M.2 2230 NVME SSD

How to Use:
Hard Disk Cooling Installation Tutorial:
1. Turn off the for STEAM DECK.
2. Remove the eight screws on the back of the for STEAM DECK.
3. Pry off the rear cover. (1) Insert a tab along the of the right‑hand handle into the gap between the back cover and the front housing.
4. Remove the protective plate. (1) Use a screwdriver to unscrew the three screws securing the , one 3.4mm / 0.13in screw and two 3.7mm / 0.15in screws. (2) Remove the screws and detach the .
5. Remove the SSD. (1) Use a screwdriver to unscrew the screws securing the SSD. (2) Remove the fixing screws and pull out the hard disk.
6. Install the heat sink (1) Peel off the heat sink protective film. (2) Tear off the protective film of the thermal paste and stick the thermal paste on the of the hard disk particles as shown in the picture. (3) Align the heat sink with the hard disk and press it into the thermal slot.
7. Install the SSD. Reinsert the SSD with the heat sink installed into the slot and tighten the screws

PackageList:
1 x Copper Heat Sink
2 x Phase Change Thermal Pad
3 x Silicon Thermal Pad
1 x Screwdriver
1 x Open Pry Bar
1 x Triangle Pry Tool
18 x Screw
1 x Storage Box
ProductSiteLaunchDate : 2024-06-24T06:29:28.341Z
Size : Universal
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 32131000