Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Omninmo
BulletPoint1 : Save Your Money: Sometimes pinion gears wear out before electric motors get broken. Before getting a pricey new motor, try to replace the pinion gears first. That's when this pinion gear puller comes in handy! A money-saver!
BulletPoint2 : 5 Kinds Pins: This gear puller set includes five pins for pulling pinion gears of different sizes. Pins Size: 0.8mm(0.031in) (Cylindrical), 1.3mm(0.051in) (Semicircular), 1.5mm(0.059in) (Cylindrical), 1.6mm(0.062in) (Cylindrical), 2.2mm(0.086in) (Semicircular). Omninmo bearing puller can gear with a maximum outer diameter of 11mm(0.43in) and a tooth height of 12mm(0.47in) can be extracted.
BulletPoint3 : Quality Material: Motor pinion gear puller is made of metal material, efficient, wear resistant, stable and reliability, easy to use.
BulletPoint4 : Professional Motor Gear Remover: Stable characteristics and high reliability, it is preferred by model amateur, RC enthusiasts.
BulletPoint5 : Application: Omninmo pinion gear puller is designed for removing bearings, inner rings and other dense components on your car. Suitable for remote control model, car inner rings and other dense components install and disassemble.
Color : One Color
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 8088641650589
GpsrSafetyAttestation : 1
ItemName : Omninmo RC Motor Gear Puller Universal Motor Pinion Gear Puller Remover for Vehicle Model/Small Motor with Blue Gear Puller, Motor Pinion Gear Professional Remover(2pcs)
ItemPackageDimensions_Height : 1.1 centimeters
ItemPackageDimensions_Length : 5.6 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-motors
Manufacturer : Omninmo
ManufacturerMinimumAge : 36
Material : Metal
ModelName : lichen
ModelNumber : B14
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : B14
ProductDescription : Omninmo Motor Pinion Gear Professional Remover


Features:

- Motor pinion gear puller remover is made of metal material, efficient, wear resistant, stable and reliability, easy to use.

- Convenient to carry, lightweight and compact, and it is easy to install and disassemble.

- 5 Kinds pins. This gear puller set includes five pins for pulling pinion gears of different sizes.

- Designed for removing bearings, inner rings and other dense components on your car.

- Suitable for remote control model, car inner rings and other dense components install and disassemble.

Pins Size: 0.9mm (Cylindrical), 1.75mm (Semicircular), 1.75mm (Cylindrical), 1.9mm (Cylindrical), 2.8mm (Semicircular)

Usage of gear puller:

1. Please select the needle according to the size of the motor shaft diameter. Do not use a motor with too small needle and too large shaft diameter for tooth extraction, otherwise the ejector pin will be broken. The glued gear must be heated to melt the glue before tooth extraction!!

2. Select the tooth puller thimble you need, install the tooth puller rotating rod, and tighten the screw (Note: For a table thimble, the screw should not be too tight).

3. Install the gear puller rotating rod into the gear puller bracket.

4. Install the gear puller traveling plate.

5. Clip the motor into the gear puller traveling plate and move it until the motor shaft aligns with the gear puller ejector pin.

6. Rotate the gear puller lever uniformly in a clockwise direction to pull out the motor gear.

7. Gear with a maximum outer diameter of 11 mm and a tooth height of 12 mm can be extracted.

Product Weight : 105 G / 3.70 Ounces

Product Dimensions (L*W*H) : 5.6*5.0*1.1 CM / 2.20*1.97*0.43 Inches


Package Include:

1 x Pinion Gear Puller

1 x Blue Gear Puller
ProductSiteLaunchDate : 2024-10-12T08:05:31.496Z
Size : Purple
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Unisex Children
TargetGender : unisex
UnitCount : 1
UnspscCode : 26111500
Voltage : 12 volts