Cart 2 india

Specification
Brand : MAXIM INTEGRATED PRODUCTS
BulletPoint1 : Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages
BulletPoint2 : Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical)
BulletPoint3 : Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground
BulletPoint4 : Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage
BulletPoint5 : Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation
ExternallyAssignedProductIdentifier1 : 0799993466886
ExternallyAssignedProductIdentifier2 : 799993466886
ItemName : MAXIM INTEGRATED PRODUCTS MAX954ESA+T Operational Amplifier, Op Amp + Comparator + Reference, 1 Amplifier, 125 kHz, 66 V/ms, 2.4V to 7V
ItemPackageQuantity : 1
ItemTypeKeyword : comparators
Manufacturer : MAXIM INTEGRATED PRODUCTS
Material : PDIP
ModelNumber : LM339N
MountingType : Surface Mount
NumberOfItems : 10
PartNumber : ARNEW-73Y6470-D2018
ProductDescription : The LM339 devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.

The LM339N can operate up to an absolute maximum of 36 V on the supply pin. This standard device has proven ubiquity and versatility across a wide range of applications. This is due to very wide supply voltages range (2 V up to 32 V), low Iq, and fast response of the device.

The open-drain output allows the user to configure the output logic low voltage (VOL) and allows the comparator to be used in AND functionality.

The comparator consists of a PNP Darlington pair input, allowing the device to operate with very high gain and fast response with minimal input bias current. The input Darlington pair creates a limit on the input common-mode voltage capability, allowing the comparator to accurately function from ground to (VCC – 1.5 V) differential input. Allow for (VCC – 2 V) at cold temperature.

The output consists of an open-collector NPN (pulldown or low-side) transistor. The output NPN sinks current when the negative input voltage is higher than the positive input voltage and the offset voltage. The VOL is resistive and scales with the output current.
ProductSiteLaunchDate : 2023-08-28T06:54:08.664Z
Size : Juried Engineering ESD Safe Packaging (Pack of 10)
SpecificationMet : RoHS