Details
Non-skid Rubber Legs: The four rubber legs that elevate the bottom, ventilate and dissipate heat, and better hold the product in place to prevent sliding and scratching of the countertop.
R Corners: The R-shaped design of the tanks reduces the amount of oil used and makes it easy to clean.
Equipped with Lids: The lid of the pot is set to keep the pot clean and warm. When the lid is covered, it avoid water dripping into the pot causing hot oil splashing and wounding.
Application
It can be used for commercial fryers, fryers, doughnut machines, stall gas fryers skewer fryers, and many other scenarios to meet the needs of different customers. Ideal for supermarkets, hotels, canteens, restaurants, banquet halls, individual food processing, etc. Ideal for cooking, cooking, and other cooking methods.
How to Use
The low pressure valve must be used
1. Connect the gas pipe, low pressure valve and gas tank.
2. Check that each switch is off.
3. Put in the appropriate oil or water (can not be less than one-fourth of the depth of the oil pan), cover the lid (when putting the oil, try to avoid contact with water drops to prevent oil splashes and hurting people).
4. Fire, when the temperature is right, put the food that needs to be cooked. When the food is cooked, remove it with special tools (do not touch the body to avoid burns).
5. When the operation is completed, pay attention to check whether each switch is off.
6. Wait for the temperature to drop before pouring the oil and water out.
Specification
Material: Stainless Steel, Rubber
Capacity Per Pot: 6 L
Heating Method: Gas
Temperature Control: 50~380 ℃
Length of the Tube: 1.1 m/ 3.6 ft
Each Lid Size: 32.5*26.5cm/12.8*10.4in
Each Tank Size: 32.5*26.5*14cm/12.8*10.4*5.5 in
Inner Dimension of Each Tank: 30*23.5*14cm/ 11.8*9.3*5.5 in
Product Size: 56.5*45.5*26cm/ 22.2*17.9*10.2 in
Overall Height(with Oil Stopper): 33.5cm/13.3in
Weight:12 kg/ 26.5lbs
Package Included
1 * Gas Fryer(2 Tanks)
1 * Tube
2 * Lids
4* Rubber Legs
All Accessories for Installation
Notes
1. When cleaning and maintenance, the gas should be turned off to prevent accidents.
2. This machine must be installed before using four rubber legs, easy ventilation and heat dissipation ,and it also preventing overheating at the bottom.
3. Do not use strong corrosive cleaning products.
4. After each operation, you need to wait for the temperature to be lowered before cleaning. After washing, wipe the water clean and store it in a dry and ventilated place.
5. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.