Cart 2 india

Specification
Brand : uxcell
BulletPoint : Made in United States
BulletPoint1 : Combination Drill and Tap Bit: Thread size: M6 x 1; hex shank size: 1/4"; drilling + tapping length: 23mm / 0.9", total length: 43mm / 1.7". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.
BulletPoint2 : 3-in-1 Combination: The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.
BulletPoint3 : Special Design: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.
BulletPoint4 : 6542 High Speed Steel: The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.
BulletPoint5 : Tips: Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
Color : Balck
CuttingAngleString : 135 degrees
ExternallyAssignedProductIdentifier : 7375604567376
ExternallyAssignedProductIdentifier1 : 697334003373
ExternallyAssignedProductIdentifier2 : 0697334003373
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : uxcell Combination Drill and Tap Bits, Metric M6 x 1 Thread 1/4" Hex Shank 4341 High Speed Steel Threading Screw Taps Machine Drilling Tapping Tool Kit
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : combination-drill-and-taps
Manufacturer : uxcell
Material : High Speed Steel (HSS) 4341
Material1 : High Speed Steel
Material2 : Alloy Steel
ModelNumber : EYEUS-GY0686
NumberOfFlutes : 2
NumberOfItems : 6
NumberOfPieces : 1
PartNumber : a24073000ux0021
ProductDescription : The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.
Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..
Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.
6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.
Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.

ProductSiteLaunchDate : 2024-08-21T10:03:27.080Z
Size : M2.5/3/4/5/6/8/10/12
Style : Hex Shank Thread Metric Tap
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Aluminum
SurfaceRecommendation1 : Aluminum
SurfaceRecommendation10 : Ceramic
SurfaceRecommendation11 : Glass
SurfaceRecommendation12 : Pine
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Plastic
SurfaceRecommendation4 : Stainless Steel
SurfaceRecommendation5 : Masonry
SurfaceRecommendation6 : Stone
SurfaceRecommendation7 : Cast Iron
SurfaceRecommendation8 : Iron
SurfaceRecommendation9 : Brass
UnitCount : 1
UnspscCode : 27110000