Cart 2 india

Specification
Brand : uxcell
BulletPoint : THIS IS A NEW NEVER USED #4 X 40 NC HSG UNIPASS DRILL AND TAP COMBO
BulletPoint1 : Combination Drill and Tap Bit: Thread size: M10 x 1.5; hex shank size: 1/4"; drilling + tapping length: 30mm / 1.18"; total length: 57mm / 2.24". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.
BulletPoint2 : 3-in-1 Combination: The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.
BulletPoint3 : Special Design: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.
BulletPoint4 : 6542 (M2) High Speed Steel: The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating provides high hardness, increased lubricity, and improved heat resistance.
BulletPoint5 : Tips: Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
FinishType : Uncoated
ItemName : uxcell Combination Drill and Tap Bits Metric M10 x 1.5 Thread 1/4" Hex Shank TiAlN Coated Threading Screw Taps 6542 High Speed Steel Machine Drilling Tapping Tool Kit
ItemPackageDimensions_Height : 12.4968 centimeters
ItemPackageDimensions_Length : 1.8034 centimeters
ItemPackageDimensions_Width : 2.794 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : combination-drill-and-taps
Manufacturer : uxcell
Material : High Speed Steel (HSS) 6542
NumberOfFlutes : 2
PartNumber : a24071100ux1249
ProductDescription : The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.
Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..
Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.
6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.
Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.

ProductSiteLaunchDate : 2024-08-21T08:35:13.369Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Aluminum
SurfaceRecommendation10 : Brick
SurfaceRecommendation11 : Tile
SurfaceRecommendation12 : Masonry
SurfaceRecommendation13 : Concrete
SurfaceRecommendation14 : Stone
SurfaceRecommendation15 : Cast Iron
SurfaceRecommendation16 : Iron
SurfaceRecommendation17 : Brass
SurfaceRecommendation18 : Ceramic
SurfaceRecommendation19 : Engineered Wood
SurfaceRecommendation2 : Metal
SurfaceRecommendation20 : Polyvinyl Chloride
SurfaceRecommendation21 : Acrylonitrile Butadiene Styrene
SurfaceRecommendation22 : Nylon
SurfaceRecommendation23 : Porcelain
SurfaceRecommendation24 : Glass
SurfaceRecommendation25 : Pine
SurfaceRecommendation3 : Plastic
SurfaceRecommendation4 : Stainless Steel
SurfaceRecommendation5 : Wood
SurfaceRecommendation6 : Copper
SurfaceRecommendation7 : Alloy Steel
SurfaceRecommendation8 : Acrylic
SurfaceRecommendation9 : Fiberglass
UnitCount : 1
UnspscCode : 27110000