Cart 2 india

Specification
Brand : Tegara
BulletPoint1 : Collet Series: ADS06
BulletPoint2 : Collet Size: 1/8"
BulletPoint3 : TIR (inch): 0.0001"
BulletPoint4 : Collet Nut Style: Slotted
BulletPoint5 : Shank Dia. (C): 1-1/4"
BulletPoint6 : Shank Length (L1): 6.20"; OAL: 8.25"
CompatibleDevices : Drilling Machine
ExternallyAssignedProductIdentifier : 6903036774614
ExternallyAssignedProductIdentifier1 : 0663566025841
ExternallyAssignedProductIdentifier2 : 663566025841
ExternallyAssignedProductIdentifier3 : 00887861174619
ExternallyAssignedProductIdentifier4 : 0769053018089
ExternallyAssignedProductIdentifier5 : 00769053017198
IncludedComponents : MT3 Morse Taper Collet Set
ItemName : Tegara 1/8 in. 5 Micron ADS06 Collet 202-7324 P[
ItemPackageDimensions_Height : 21.9 centimeters
ItemPackageDimensions_Length : 4.9 centimeters
ItemPackageDimensions_Width : 5.2 centimeters
ItemPackageQuantity : 1
ItemShape : Round Smooth Bore
ItemTypeKeyword : workholding-collets
Manufacturer : Shars Tool
Material : High Carbon Steel
ModelName : Straight Shank ER32 Collet Holder
ModelNumber : 0223-0216
NumberOfItems : 1
PartNumber : 202-7324
PowerSourceType : ac/dc
ProductDescription : ADS collet with 4 degree taper and longer body length than standard ER collet has more contact surface with the cutting tool shank and the bore of the tool holder. The ADS collet seats deeper and flush with the nose with no overhang generate more gripping force and greater accuracy. Without a collet nut would also prevent chip packing or stringy bird nests below the collet chuck to extend tool holder service life. Runout tolerance witin 5 micron / .0002" at 4xD location. Each collet's accuracy is individually inspected multiple times within in a tool holder to assure the runout tolerance. With the clamping by drawbar mechanism it provides stronger gripping power than ER collet at extended length. Made from high carbon steel and heat treated for longer tool life. All ADS collet undergo a sub-zero cryogenic treatment (-90 Celcius) after heat treatment to remove residual austenite. This process creates an uniform martensite state and eliminate distortion, preventing deformation during the life cycle of the collet. Precision ground finished on internal bore, external surface and end surface.
ProductSiteLaunchDate : 2019-08-13T07:00:00.000Z
Size : 5PC chuck and 12PC collets set HAAS
StreetDate : 2017-03-12T00:00:01Z
Style : 5 Micron
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
Voltage : 852 volts