Cart 2 india

Specification
Brand : AMONIDA
BulletPoint1 : Made of 40Cr material, it has good low temperature impact toughness and low notch sensitivity.
BulletPoint2 : The clamping accuracy of the tool holder is high, which can ensure the concentricity and balance during processing.
BulletPoint3 : Easy to operate, can realize quick loading and unloading of tools, often used in CNC machining centers.
BulletPoint4 : The maximum speed is 8000r/min, the operation is stable and the chip volume is even.
BulletPoint5 : The effective length of the CNC tool holder is 2.76in, which is suitable for CAT40-ER16 machine tools.
ExternallyAssignedProductIdentifier1 : 0752273531100
ExternallyAssignedProductIdentifier2 : 752273531100
ItemName : 40Cr Tool Holder, Milling Collet Holders CAT40‑ER16‑2.76in for CNC Machining
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : workholding-collets
Manufacturer : AMONIDA
Material : Alloy Steel
ModelNumber : RT826
NumberOfItems : 1
PartNumber : 202-6755
Pattern : 1/8"
ProductDescription : Feature:
1. The effective length of the CNC tool holder is 2.76in, which is suitable for CAT40-ER16 machine tools.
2. The clamping accuracy of the tool holder is high, which can ensure the concentricity and balance during processing.
3. The maximum speed is 8000r/min, the operation is stable and the chip volume is even.
4. Made of 40Cr material, it has good low temperature impact toughness and low notch sensitivity.
5. Easy to operate, can realize quick loading and unloading of tools, often used in CNC machining centers.


Specification:

Item Type: CNC Tool Holder
Tool Holder Model: CAT40-ER16-2.76in (CAT40 refers to the tool holder model, ER16 refers to the jacket model, 2.76 refers to the effective length of the tool holder is 2.76in)
Tool Holder Material: 40Cr
Maximum Speed: 8000r/min
Tool Holder Accuracy: 0.008mm
Application Scope: CNC machining center
Whether Coating: Coating
Matching Collet: ER16 (not included)
Collet Clamping Range: Approx. 1-10mm / 0-0.4in
Matching Pull Stud Model: 5/8-11UNC (American thread) (not included)
Tool Holder Color: Silver + black





Package List:
1 x CNC Tool Holder

Note:
1. Correctly install the pull stud to the end of the handle before use.
2. The chuck must first be fixed with a nut, insert the tool, and then lock into the knife body.
3. When the tool enters the sleeve hole, the hole must exceed the effective tightening length of the tool to avoid improper locking and damage.

ProductSiteLaunchDate : 2022-08-09T00:00:00.000Z
Size : 7MM
Style : 5 Micron
UnitCount : 1
UnspscCode : 27112800