Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : TenaxUSA
BulletPoint1 : Tenax Cement Remover is a water-based descaling detergent that removes dirt such as joint residues, rust, traces of wall painting, mineral deposits. Excellent degreaser.
BulletPoint2 : Pleasantly scented, Does not contain hydrochloric acid, Does not attack cement joints, Does not emit corrosive fumes for metals, Concentrated to be diluted with wate,r Ideal for indoor and outdoor use
BulletPoint3 : Cement Remover can be used as a high powered cleaner on a variety of materials, as long as they are acid resistant When it is diluted to the proper strength, it can be used to clean dirt and residue
BulletPoint4 : 5.3 oz., pre-shrunk 100% cotton. Dark Heather is 50/50 cotton/polyester. Sport Grey is 90/10 cotton/polyester. Double-needle stitched neckline, bottom hem and sleeves.Quarter-turned. Seven-eighths inch seamless collar. Shoulder-to-shoulder taping
BulletPoint5 : Best cement truck driver life shirts, cement truck driver life Job Title shirts for you!
Color : White
ContainsLiquidContents : 1
Department : mens
ExternallyAssignedProductIdentifier : 4063648787913
ExternallyAssignedProductIdentifier1 : 0680332995764
ExternallyAssignedProductIdentifier2 : 680332995764
FitType : Regular Fit
GpsrSafetyAttestation : 1
HeightMap : Low Top
ItemForm : Liquid
ItemLengthDescription : Standard Length
ItemName : HiE-Coat 840-C High Emissivity Coating for Ceramics Fiber Modules and Refractories, Quart
ItemPackageDimensions_Height : 10 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-coatings
ItemVolume : 1 liters
Manufacturer : Graphtek
Material : Polyester,Cotton
ModelName : 980006-405/013
ModelNumber : ARMC-840-C
NumberOfItems : 1
PartNumber : 840-C
Pattern : Plain-Coloured
PatternType : Solid
PowerSourceType : Manual
ProductDescription : HiE-Coat 840-C is a single part ceramic-based, black-pigmented, high-emissivity coating for ceramic fiber modules and refractories used in heaters, ovens and furnaces to 2500°F (1371°C). Dramatically increases a refractory's ability to absorb and re-radiate energy, improving thermal efficiency and performance.

Curing is accomplished by air-drying at room temperature for 1-2 hours, then curing for 1 hour at 200°F.

On the picture HiE-Coat 840-C coats exhaust pipe insulation.

ProductSiteLaunchDate : 2012-11-16T00:36:31.852Z
Scent : Pleasant
ShoeWidth : Schmal
Size : 33.81 Fl Oz (Pack of 1)
Style : Seamless
SurfaceRecommendation : Wall
TargetGender : female
ToeStyle : Round Toe
UnitCount : 33.814
UnspscCode : 23271800