SpecificationBrand : SFOWLOGE
BulletPoint1 : High-quality Material: This Battery Clamp Accessory is made of high-quality copper, ABS plastic shell, and thickened silicone wire as raw materials. Therefore, it has good electrical conductivity, water resistance, and wears resistance performance.
BulletPoint2 : Anti-short Circuit: Battery clamp positive and negative electrodes with electric misclip short circuit protection. When the positive and negative clamps are connected together, it will automatically disconnect.
BulletPoint3 : Stable Voltage: This product has a stable 12V voltage, it can supply power smoothly to protect the car starter.
BulletPoint4 : Anti-short Circuit: Battery clamp positive and negative electrodes with electric misclip short circuit protection. When the positive and negative clamps are connected together, it will automatically disconnect.
BulletPoint5 : Anti-reverse Connection: When the two are accidentally connected incorrectly, the starter power supply and the positive and negative clamps will automatically power off to ensure safety.
Color : Black / Red
ExternallyAssignedProductIdentifier : 7619363119187
IncludedComponents : 1* Battery Clamp
ItemName : SFOWLOGE 12V gasoline vehicles Battery Clamp Accessory Battery Clamp Accessory for Smart Battery Chargers
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-body-repair-clamps
Manufacturer : SFOWLOGE
Material : Metal
Material1 : Copper
Material2 : Acrylonitrile Butadiene Styrene
ModelName : Battery Clamp Accessory
ModelNumber : A1
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CWCYXQ
ProductDescription :
Description
Have you ever had the experience of being forced to be stranded on the highway when your car ran out of power? After being trapped, you call for help, but it takes too long for the rescue team to come. With this battery clamp, it can quickly help you restart your car's power and get you out of the dilemma of being stranded.
Application
This product is suitable for EC5 port power. It is suitable for 12V gasoline vehicles and is compatible with most car mini jump portable starters and mobile chargers and can start faster when fully charged with 4 cells.
Specification
Model: A1
Color: Black / Red
Wire Gauge: 10 AWG
Assembly Required: No
Applicable: EC5 Socket Power
Material: Copper, ABS
Voltage: 12V
Peak Current: 600A
Total Wire Length: About 45cm/17.72in
Weight: 0.19kg/ 0.42 lbs
Battery Clamp Length: 9.5cm/3.74in
Product Size: 10*4.5cm/ 3.94*1.77 in
Package Size: 20.9*7*2cm/8.23*2.76*0.79 in
Package Included
1* Battery Clamp
Notes
1.Please don't start the car continuously with the ignition on or twist the key and don't release it, each start needs more than 1-minute interval.
2.Please remove the battery clamp within 30 seconds after starting the car.
3.The positive and negative poles cannot be reversed. Otherwise, it will easily cause a short circuit.
4.If the number of battery indicators is less than 3, please do not use the jumper starter to start the vehicle in order to protect the jumper starter from damage.
5.This product should not be overloaded. Please check the power supply of the equipment before use.
6.Please check if the product supports your car.
7.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
ProductSiteLaunchDate : 2025-05-13T10:28:44.885Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111700