Cart 2 india

Specification
Brand : Forney
BulletPoint : Sold on Amazon
BulletPoint1 : 9 1/2-Inch long with 2-1/4 wide jaw opening
BulletPoint2 : No 1/0 welding cable capacity
BulletPoint3 : Rugged economical ground clamp for shop maintenance and fieldwork
BulletPoint4 : For extra heavy duty jobs
BulletPoint5 : Fine for good grounds on steel plate angle iron and pipe
Color : Silver
ExternallyAssignedProductIdentifier1 : 032277545106
ExternallyAssignedProductIdentifier2 : 0032277545106
ExternallyAssignedProductIdentifier3 : 00032277545106
Hazmat : auto-grounding
Hazmat1 : MAGNETIZED MATERIAL
Hazmat10 : DE_NoAir
Hazmat11 : EG_NoAir
Hazmat12 : ES_NoAir
Hazmat13 : FR_NoAir
Hazmat14 : GB_NoAir
Hazmat15 : IE_NoAir
Hazmat16 : IN_MagnetizedMaterial
Hazmat17 : IT_NoAir
Hazmat18 : JP_NoAir
Hazmat19 : MX_MagnetizedMaterial
Hazmat2 : UN2807
Hazmat20 : NL_NoAir
Hazmat21 : PL_NoAir
Hazmat22 : SA_NoAir
Hazmat23 : SE_NoAir
Hazmat24 : SG_NoAir
Hazmat25 : TR_NoAir
Hazmat26 : US_MagnetizedMaterial
Hazmat27 : ZA_NoAir
Hazmat3 : 9
Hazmat4 : AE_NoAir
Hazmat5 : AU_NoAir
Hazmat6 : BE_NoAir
Hazmat7 : BR_MagnetizedMaterial
Hazmat8 : CA_MagnetizedMaterial
Hazmat9 : CN_MagnetizedMaterial
IncludedComponents : Ground Clamp
ItemDisplayWeight : 0.71 pounds
ItemName : Forney 54510 Welding Ground Clamp, 500-Amp, 9-1/2-Inch, Silver
ItemPackageDimensions_Height : 5.08 centimeters
ItemPackageDimensions_Length : 20.574 centimeters
ItemPackageDimensions_Width : 12.954 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : welding-clamps
Manufacturer : Forney
Material : Metal
ModelName : 54510
ModelNumber : 54510
NumberOfItems : 1
PackageLevel : unit
PartNumber : 54510
ProductDescription :

Specifications:

Material: aluminum alloy

Packing size: 18*11*10cm

Weight: approx 3kg

Instructions for use:

1. Fix: Fix the belt that needs to be connected to the groove (usually V, O-shaped groove) under the aluminum clamp (the clamp is mainly referred to as the washer and nut). Specific method: remove the gaskets fixed on both sides of the nut and the nut (depending on the diameter of the belt, if the belt can be directly inserted into the groove, it is not necessary to remove the nut and the gasket), the belt is placed in the groove, and the gasket is The nut is re-fixed above the groove, and the splints on both sides are in a parallel state, and the spacing is about 2 cm (the thermostatic heater can be placed in the middle).

2. Heating: The thermostat heater is energized to a constant temperature (the optimal temperature of the belt connection is 160-180 degrees), and the fixed belt is heated (provided that the heated belt does not have air bubbles, otherwise the connection effect is affected), and then docked, Tighten the manual pliers nut under the clamp to the belt butt.

3. Reprocessing: The belt is butted, and after it is completely cooled, it is taken out, and the belt is scraped and flattened.

Tips: PU round belt polyurethane round belt diameter is small, please put the round belt in the top slot, make the round belt 2 joints align, connect the round belt with larger diameter or the red polyurethane triangle belt, please put it below Inside the groove!

Packing including：

1*High precision connector

ProductSiteLaunchDate : 2009-09-04T18:50:45.000-00:00
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=2484871
Size : No Size
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 1 volts