Cart 2 india

Specification
Brand : Climax Metals
BulletPoint1 : Two-piece clamping shaft collar for applications requiring stronger holding power and higher axial load capacity than set screw or one-piece clamping collars
BulletPoint2 : Effective on both hard and soft shafts
BulletPoint3 : Mild steel for weldability and rust resistance with zinc plating for better resistance to corrosion than black oxide steel
BulletPoint4 : Includes two steel hex socket cap screws for securing collar onto shaft
BulletPoint5 : Operating temperature range of -17 to +121 degrees C (0 to 250 degrees F)
BulletPoint6 : This set of screw collars are the smallest of all the collars, very easy to install and change.
ExteriorFinish : Black Oxide
ExternallyAssignedProductIdentifier : 9497371129385
ExternallyAssignedProductIdentifier1 : 0760178612053
ExternallyAssignedProductIdentifier2 : 760178612053
ItemName : Climax Metal Products 2C-162-Z Two-Piece Clamping Shaft Collar, Mild Steel, Zinc Plating, 1-5/8" Bore, 2-5/8" OD, 11/16" Width, 5/16-24 x 1" Clamp Screws (2)
ItemPackageDimensions_Height : 1.1 inches
ItemPackageDimensions_Length : 2.6 inches
ItemPackageDimensions_Width : 2.6 inches
ItemPackageQuantity : 2
ItemTypeKeyword : clamp-on-shaft-collars
Manufacturer : Climax Metal Products Company
Material : Carbon Steel
NumberOfItems : 1
PartNumber : 2C-162-Z
ProductDescription : This Climax Metal Products 2C-162-Z two-piece clamping shaft collar has a 1-5/8" bore and is made of zinc-plated mild steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than set screw or one-piece clamping collars. The two-piece assembly separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than set screw collars and is effective on both hard and soft shafts. It is made of mild steel for weldability and is zinc plated for better resistance to corrosion than black oxide steel. This collar comes with two steel hex socket cap screws for securing the collar onto the shaft. It has a 2-5/8" outside diameter (OD), is 11/16" wide, and has an operating temperature range of -17 to +121 degrees C (0 to 250 degrees F). This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, the hobby craft industry to hold wheels on axles in remote control vehicles, and others. Shaft collars are ring-shaped devices primarily used to secure components onto shafts. They also serve as locators, mechanical stops, and spacers between other components. The two basic types of shaft collars are clamping (or split) collars, which come in one- or two-piece designs, and set screw collars. In both types, one or more screws hold the collars in place on the shaft. In set screw collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it.
ProductSiteLaunchDate : 2021-09-03T19:51:35.085Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable