Cart 2 india

Specification
Brand : Climax Metal
BulletPoint : Price for Pack of 5 pcs
BulletPoint1 : The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
BulletPoint2 : The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 5mm to 6mm/0.2inch to 0.24inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
BulletPoint3 : Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
BulletPoint4 : Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
BulletPoint5 : Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
Color : Silver
DriveSystem : External Hex
ExteriorFinish : Silver
ExternallyAssignedProductIdentifier1 : 744337424008
ExternallyAssignedProductIdentifier2 : 0744337424008
FinishType : Brass
GpsrSafetyAttestation : 1
GradeRating : industrial
ItemName : Climax Metal H2C-131-S, H2C-Series 2 Piece Clamp Recessed Screw Collar (Pack of 5 pcs)
ItemPackageDimensions_Height : 9.6 centimeters
ItemPackageDimensions_Length : 2.3 centimeters
ItemPackageDimensions_Width : 7.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : clamp-on-shaft-collars
Manufacturer : Climax Metal
Material : Stainless Steel
MeasurementSystem1 : Metric
MeasurementSystem2 : Inch
MetalType : Iron
MetalType1 : Stainless Steel
MetalType2 : Brass
ModelNumber : mea220111ee0460
NumberOfItems : 5
NumberOfPieces : 2
PartNumber : H2C-131-S
ProductDescription : Climax Metal, H2C-131-S, H2C-Series 1-5/16" Two Piece Clamp Recessed Screw Collar, Stainless Steel. Features: Stainless Steel Two-Piece Clamping Collar - Recessed Screw Head. Recessed Screw Head provides an outside surface free of major projections for safety. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw collars. Effective on hard and soft shafts.
ProductSiteLaunchDate : 2019-07-30T08:46:41.030Z
Size : 5mm to 6mm
Style : Blue
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161500