Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : REED Instruments
BulletPoint1 : Measures AC/DC current/voltage, resistance and frequency
BulletPoint2 : 4000-count LCD display with analog bargraph
BulletPoint3 : Min/Max, display hold, peak hold and relative mode
BulletPoint4 : Cat. III 600V, Cat. II 1000V safety rating
BulletPoint5 : Includes test leads, battery and carrying case
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0744370590845
ExternallyAssignedProductIdentifier2 : 744370590845
ExternallyAssignedProductIdentifier3 : 0799695350803
ExternallyAssignedProductIdentifier4 : 04711552152388
Hazmat : 9
IncludedComponents : Test lead kit, Type K probe, case, 9 Volt battery
ItemName : SSEYL ETCR6000 Digital AC/DC Clamp Current Leaker Meter
ItemPackageDimensions_Height : 20.8 centimeters
ItemPackageDimensions_Length : 5.4 centimeters
ItemPackageDimensions_Width : 17.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : clamp-meters
Manufacturer : ETCR
MeasurementAccuracy : +/-0.5%
MeasurementType : Multimeter
ModelNumber : ETCR6000
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ETCR6000
PowerSourceType : Battery Powered
ProductDescription :
*Function Measurement of AC/DC current, leakage current
*Power Supply 6F22,9V
*Test Mode Clip-on CT, integral mode
*Clamp Size Φ7mm
*Measurement Range 0mA-60.0A AC/DC
*Resolution 1mA AC/DC
*Accuracy ±2%rdg±5dgt (23℃±5℃, below 75%rh)
*Display Mode Four digits LCD display
*Dimension LWH: 168mm×65mm×34mm
*LCD Dimension 35mm×21.5mm; display domain: 32mm×15mm
*Sampling Rate 2 times/s
*Frequency AC: 45Hz-400Hz
*Polarity Indication DC current auto identified and display“—”
*Test Position Tested wire in the jaw center
*Range Shift Automatically
*Line Voltage AC600V
*RS232 Interface Data stored in the memory of the meter via RS232 upload to PC
*Com-Configure Baud rate:9600, data bit:8, stop bit:1
*Data Memory 99units, FULL blinks when the memory is full
*Reading Hold DH indicating the reading is hold
*Out of Range OL indicating the current is out of range
*Auto Power-off 5 Minutes after power on, it will power off automatically to lower the power consumption
*Battery Voltage Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
*Weight 180g (including the battery)
*Working Current 10mA
*Consumption 10mW
*Working Temperature and Humidity -10℃-50℃,below 80%rh
*Limit Temperature Error -10℃-0℃ and 40℃-50℃, within 2%rdg
*Storage Temperature and Humidity -10℃-60℃,below 70%rh
*Insulating Strength AC2kV/rms (between the alloy of the clamp and the housing)
*Applicable safety rules IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)
ProductSiteLaunchDate : 2015-11-12T07:05:53.066Z
Size : 91mm W x 210mm H x 40mm D
StreetDate : 2017-05-15T00:00:01Z
Style : Standard
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1