Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : Generic
BulletPoint1 : Measure 4-20 mA signals without breaking the loop
BulletPoint2 : Compact clamp meter for PLC and control systems analog I/O
BulletPoint3 : Detachable clamp with extension cable allows measurements in tight locations
BulletPoint4 : Built-in spot light illuminates hard to see wires in dark enclosures
BulletPoint5 : Best in class accuracy of 0.2%
Color : Yellow/Black
ExternallyAssignedProductIdentifier1 : 195112129029
ExternallyAssignedProductIdentifier2 : 0195112129029
Hazmat1 : un1993
IncludedComponents : Clamp Meter, Batteries
ItemName : FLK 773 Advanced Milliamp Process Clamp-Meter
ItemPackageDimensions_Height : 5.31 inches
ItemPackageDimensions_Length : 16.73 inches
ItemPackageDimensions_Width : 9.37 inches
ItemPackageQuantity : 1
ItemTypeKeyword : clamp-meters
LowerTemperatureRating : -20 degrees_celsius
Manufacturer : FLK
Material : acrylonitrile_butadiene_styrene
MeasurementAccuracy : 0.2%
ModelName : Clamp meter Ground insistance meter insulation meter
ModelNumber : FLUKE-301D/ESP
NumberOfItems : 1
NumberOfLithiumIonCells : 1
NumberOfLithiumMetalCells : 1
PackageLevel : unit
PartNumber : 773
Pattern : G-ETCR7350
PowerSourceType : Battery Powered
ProductDescription : The Flk milliamp process Digital clamp-meter is a manual-ranging meter for measuring DC milliampere (MA) and DC Voltage output signals of 24V loop circuits. It has a clamp that measures DC to 100MA. The clamp has two jaws that can close around an electrical conductor up to 4.5mm (0.177 inches) in diameter to measure current without touching or Interrupting the circuit, and has a 1 M extension cable so it can detach from the meter Body for hard-to-reach applications. A set of Test leads is included for measuring DC to 24MA and DC Voltage to 30V. The meter can source and simulate DC signals up to 20MA, can source DC Voltage signals up to 10V, and is accurate to 0.2 percent with a resolution of 0.01MA. It has an LCD that shows both milliamp readings and percent of 4 to 20MA span, and a backlight for visibility in low light that turns off automatically after two minutes. An LED at the top of the meter Body can be illuminated to aid visibility of wires in Dark enclosures. The meter features a built-in 24V loop power supply for powering a transmitter and measuring its milliampere output signal, and a scaled milliampere output for connecting to a logging device (sold separately) to record measurements. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on four 1.5V AA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. The meter is manual-ranging, so the user selects the operating range for the property being measured. It meets IEC (international electro technical commission) Safety standards 61010-1 and 61010-2-032, has CE (European Conformity) marking, and complies with CSA (Canadian standards Association), and Australia N10140. The unit comes with a Soft carrying case.
ProductSiteLaunchDate : 2024-09-17T19:35:04.010Z
Size : *ETCR7350
SpecificationMet1 : RoHS
SpecificationMet2 : EMC
SpecificationMet3 : ISO 9001
Style : Lightweight
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41113600
UpperTemperatureRating : 50 degrees_celsius
Wattage : 5 watts