Cart 2 india

Specification
Brand : INTSUPERMAI
BulletPoint1 : 220V 30L Working Tank -- 220V Laboratory Heating Circulator, the power is 3900W/5.23HP, Please note that there should be a good grounding device. It uses thickened high-quality stainless steel material, which has stable performance, durability, and is easy to clean and maintain.
BulletPoint2 : Efficient Controller -- This water bath adopts PID automatic control system,it is easy to operate and has strong temperature stability. Accurate temperature correction function which could up to 0.01℃, the highest temperature fluctuation could up to ±0.02℃ (based on different type).
BulletPoint3 : Protection Function -- Control system of the Thermostatic Circulating Bath has the over-temperature alarm design, it can set the top and lowest alarm temperature parameters,when the temperature is too high, it can automatically cut off the load function.
BulletPoint4 : Internal & External Circulation System -- Equipped with reliable circulation systems: Internal circulation could make the bath inner liquid temperature be more uniform and stability. External circulation could guide the inner bath constant temperature liquid outflow, and establish the second constant temperature field.
BulletPoint5 : Wide Application -- This high temperature heating circulator is suitable for Internal circulation and External circulation. It could be used for all kinds of experiments, widely used in biological engineering, food, chemical industry, metallurgy, chemical analysis, oil and other fields.
ExternallyAssignedProductIdentifier1 : 0840403736904
ExternallyAssignedProductIdentifier2 : 840403736904
ItemName : INTSUPERMSAI 220V 30L Lab Heated Circulator Lab High Temperature Heating Liquid Circulator Pump Thermostatic Circulating Bath Water Bath Recirculating with LCD Display Max 300℃ 3900W
ItemPackageDimensions_Height : 29 inches
ItemPackageDimensions_Length : 26 inches
ItemPackageDimensions_Width : 21 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-circulating-baths
Manufacturer : INTSUPERMAI
ModelNumber : SY020441
NumberOfItems : 1
PartNumber : SY020441
ProductDescription :
Notice:
-- Need to add liquid medium into bath before using (liquid cannot has acid-base property).
-- The total power should be greater than or equal to the instruments' power,the power must have a good "grounding" device.
-- The device should be placed in ventilated dry place, back and two side should leave obstacles 300mm distance.
-- Please let all device keep power off state after finish using.
-- The viscosity of the added medium oil should be low, preferably below 50mPa · s.
-- The outer diameter of the machine connecting pipe is 12mm (0.472in), and customers need to prepare high-temperature resistant connecting pipes with appropriate dimensions according to their own media.
-- The connecting pipe needs to be tightened to prevent it from falling off and being scalded by high-temperature liquid.

Parameters:
Voltage: 220V
Power: 3.9KW (5.23HP)
Temp range: Indoor temp ~ 300 ℃
Temp fluctuation: ± 0.2 ℃
Capacity: 30L (7.92GAL)
Applicable: Water and Oil Dual Use

Item included:
One set of 220V 30L High Temperature Heating Circulator Laboratory Heating Circulator

ProductSiteLaunchDate : 2024-04-13T01:21:12.916Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40151500
Wattage : 3900 watts