Cart 2 india

Specification
Brand : RKVKHFJ
BulletPoint1 : Chucking Reamers
BulletPoint2 : Fit K11-80 K12-80 K11-100 K12-100 K72-100 Chuck Headstock Shaft OD 25mm Length 205mm Flange Back Base Plate Adapter
BulletPoint3 : 9/16" shank diameter
BulletPoint4 : 6 Flutes
BulletPoint5 : 2 1/4" length of flute with 5/8" carbide length
Color : K11 K12 K72 80mm
ExternallyAssignedProductIdentifier : 7320556865261
ItemName : Fit K11-80 K12-80 K11-100 K12-100 K72-100 Chuck Headstock Shaft OD 25mm Length 205mm Flange Back Base Plate Adapter(K11 K12 K72 80mm)
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : chucking-reamers
Manufacturer : RKVKHFJ
Material : Carbide
MeasurementSystem : Inch
ModelName : RKVKHFJ
ModelNumber : RKVKHFJ
NumberOfItems : 1
PartNumber : RKVKHFJ
ProductDescription : Chucking Reamers
Option: 80mm or 100mm
Fit Model: K11 K12 K72 K21 Chuck
Measurement: Shaft Diameter: 25mm, Full Length:205mm
Parameters:
axis: the diameter of the shaft is 25, the length of the shaft is about 182mm, including the total length of the flange is about 204mm, and the through hole is about 19mm. Because the rear hole of the 80 chuck is only 16mm, the overall through hole is about 16mm after the chuck is installed. Hardness: HRC 55-62 ° adopts NC machining accuracy parameters: perpendicularity between shaft center and flange end face 0.03mm, concentricity between shaft center and flange 0.03mm, and outer diameter tolerance of shaft center G6.
Below is K11-80 and K11-100 Chuckmeasurements.
Below is K12-80 and K12-100 Chuckmeasurements.
==========
Number of Jaws : 6
Power : Manual
Certification : none
ProductSiteLaunchDate : 2025-04-25T13:50:01.293Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112800