Cart 2 india

Specification
Brand : Riyhch
BulletPoint1 : 【size】: M2 HSS taper chucking reamer 5pcs set which encompasses sizes of 3/8", 1/2", 5/8", 3/4", and 1" fit a 1/2" shank chuck and is equipped with 5-spiral flute. to meet your precise requirements in different projects and machining needs, so that you can easily cope with a variety of aperture machining tasks.
BulletPoint2 : 【Wide range of uses】：This reamer set , also known as construction reamer, is often used to align existing holes and enlarge small holes before bolts or rivets are installed. Whether it is bridge construction, construction, steel installation and car and truck trailer industry, it is an indispensable tool for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and many other materials.
BulletPoint3 : 【Efficient reaming】:Our taper chucking reamer is easily align and expand pre-drilled holes, ready for bolting. It makes reaming easier than using a large drill bit, and the enlarged hole is smooth and tear free. However, please note that there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use.
BulletPoint4 : 【Unique design】:The taper chucking reamer clever design of the taper point allows the metal taper reamer to enter the overlapping holes outside the line, enabling precise alignment of the bolt holes, especially for enlarging the holes in the steering knuckle and the helmsman's arm.
BulletPoint5 : 【Stable grip】:The three planes placed symmetrically on the handle provide a positive grip for portable electric and pneumatic tools, allowing you to be more stable and convenient during operation, greatly improving work efficiency.
FinishType : Uncoated
IncludedComponents : 1 * M2 HSS taper chucking reamer set
ItemName : 5PCS M2 HSS Taper Chucking Reamer Set 3/8",1/2",5/8",3/4",1 Fit 1/2" Round Shank Construction Reamer Drill Bit Bridge Also for Wood Alloy Steel Metal Align The existing Hole and Expand The Reamer
ItemPackageDimensions_Height : 2.2 inches
ItemPackageDimensions_Length : 9.06 inches
ItemPackageDimensions_Width : 8.66 inches
ItemTypeKeyword : chucking-reamers
Manufacturer : Riyhch
ModelNumber : B2H0110
NumberOfFlutes : 5
NumberOfItems : 1
NumberOfPieces : 5
PartNumber : B2H0110
ProductDescription :

Specifications:

5PCS M2 HSS Taper Chucking Reamer Set

Reamers Sizes:3/8",1/2",5/8",3/4",1"

Material:High-Speed Steel (HSS),M2

Cutting Direction:right-hand

Shank Diameter:1/2"

Note:

The taper chucking reamer set is employed to enlarge a hole to 3/8", 1/2", 5/8", 3/4" or 1". 

Initially, there has to be an existing hole, and then it is reamed to 3/8", 1/2", 5/8", 3/4" or 1". 

For instance, if you aim to expand a hole to 5/8", there must first be a 1/2”, 1/4”, 1/8”, 3/8”, 3/16”, 5/16”, 7/16”, 9/16”, 5/32”, 7/32”, 9/32”, 11/32”, 13/32” or 15/32” pre-drilled hole before reaming it out to 5/8".

Attention:

Please add some cutting oil before using a cone-shaped reamer.

Function:

The purpose of the taper chucking reamer set is to align the existing hole and enlarge the hole. 

Better results can be obtained when it is installed on a percussion drill. 

The surface of the enlarged hole is smooth and there is no trace of tearing.

Package Including： 

1 * M2 HSS taper chucking reamer set

ProductSiteLaunchDate : 2024-10-05T02:39:43.970Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Plastic
SurfaceRecommendation3 : Alloy Steel
SurfaceRecommendation4 : Brass
SurfaceRecommendation5 : Cast Iron
SurfaceRecommendation6 : Iron
SurfaceRecommendation7 : Copper
UnspscCode : 27111700