Cart 2 india

Specification
Brand : uxcell
BulletPoint : Fittings / Valves / Diaphragm Valves
BulletPoint1 : Thread Size: G1/2 (21mm), G3/8 (16mm), G1/8 (10mm). Overall Size (L*W*H): 41 x 39 x 35mm (1.61" x 1.54" x 1.38"). Please check for compatibility before purchasing
BulletPoint2 : The three threads are respectively for tube connecting, air pressure tank and compressor piston pump
BulletPoint3 : Great replacement for your old or broken check valve if it is leaking or not closing off the airflow
BulletPoint4 : It is constructed with high strength brass with good corrosion resistance that doesn’t require too much maintenance
BulletPoint5 : Before replacing the valve, make sure the compressor is totally shut down and pressure is relieved completely
Color : Gold Tone
ConnectorType : Threaded
CustomerPackageType : Standard Packaging
Department : unisex-adult
ExteriorFinish : Bronze
ExternallyAssignedProductIdentifier : 9305504267463
ExternallyAssignedProductIdentifier1 : 098268705553
ExternallyAssignedProductIdentifier2 : 0098268705553
ExternallyAssignedProductIdentifier3 : 00098268705553
IncludedComponents : Reduced Pressure Assembly Valve
ItemName : uxcell Air Compressor Check Valve, G1/2 x G3/8 x G1/8 Male Thread (21mmx16mmx10mm), 3 Way Pneumatic Brass Valve
ItemPackageDimensions_Height : 3.81 centimeters
ItemPackageDimensions_Length : 5.08 centimeters
ItemPackageDimensions_Width : 5.842 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-check-valves
Manufacturer : uxcell
Material : Brass
Material1 : Copper
Material2 : Brass
MaximumOperatingPressure : 150 pounds_per_square_inch
ModelName : 3/4" Reduced
ModelNumber : a12100800ux0695
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 3
PackageLevel : unit
PartNumber : a12100800ux0695
ProductDescription : WHY BUY OUR One way check valve?

Choosing accessories for your pipe fitting tools? You can finally stop buying expensive stainless steel pipe fittings, unreliable copper pipe fittings that rust so easily rusted, and plastic hex pipe fittings that break quickly and are unreliable.The best choice you can make for your project is to utilize brass pipe fittings. These fittings are:

• durable (thanks to premium brass construction)
• resistant to corrosion
• solid
• do not leak
• have a better thermal conductivity and a low magnetic permeability
• don’t deform with time
• provide tight sealing thanks to the relative softness of brass
• are easily installed or changed (thanks to the hexagonal head that increases the bearing surface when a wrench is applied to the fitting)

WHERE TO APPLY?

Our ½ inch float brass with well-machined male NPT threads on one end and female NPT threads on the other end are a great fit for connecting pipes. They provide the maximum fitting of the connected parts of the pipes. Also, it’s possible to repair any damaged part of a pipe with the help of our threaded reducer:just cut out the damaged part, place threads on both ends (these should be connected) and adjust it with the pipe adapter fittings.

Bonus:

• this bushing adapter can be applied for various measuring devices and collectors
• it will come in handy in case you accidentally damage any pipe threads:again just make a hole, cut the threads and then install the pipe fittings
  Note:Please be careful when choosing the size of the pipe fittings for your projects. The size is not the same as the diameter of a pipe. For the pipe with male threads, measure the outside diameter of the largest surface with the threads. For the pipe with female threads, measure the top diameter of the thread.
  ProductDescription1 : Specifications: - Size: G1/4" Female Full Ports One Way Air Check Valve. - Material: Copper - Color: Silver Tone - Pressure Resistance: 150PSI / 1MPa - Operating Temperature Range: -20-60°C. - Size: 39mm x 17mm / 1.54" x 0.67"(H*D) - Package Contents: 2Pcs x Air Check Valve
  ProductDescription2 : Note: - When installing, keep the fluid direction in line with the arrow on the product.
  ProductDescription3 : Do you have the following troubles? The toilet water flows back into the water pipe, causing the situation that the kitchen faucet bleeds blue water. The hot water inside the electric water heater backflows, causing its dry burning or even explosion. Solar hot water flows back to the water tower, resulting in wasted hot water energy. You need a check valve to prevent water backflow. Only allow water flow in one direction.
  ProductSiteLaunchDate : 2012-10-27T07:05:42.818Z
  Size : 1/2" female
  StreetDate : 2018-08-09T00:00:01Z
  SupplierDeclaredDgHzRegulation : not_applicable
  SupplierDeclaredDgHzRegulation1 : not_applicable
  SupplierDeclaredDgHzRegulation2 : not_applicable
  SupplierDeclaredDgHzRegulation3 : not_applicable
  SupplierDeclaredDgHzRegulation4 : not_applicable
  SupplierDeclaredDgHzRegulation5 : not_applicable
  SupplierDeclaredHasProductIdentifierExemption : 1
  UnitCount : 1
  UnspscCode : 39121413
  ValveType : one way check valve