Cart 2 india

Specification
Brand : Superlok
BulletPoint1 : Superlok SHCV SERIES Check Valves
BulletPoint2 : Connects Fractional Tube (Interchangable with all major brands i.e.; Parker, Swagelok, DK Lok)
BulletPoint3 : STAINLESS STEEL CHECK VALVE 6K PSI - SUPERLOK CHECK VALVE
BulletPoint4 : Ends Leaks-Saves Time and Money
BulletPoint5 : Red Ring Fitting-A built-in Gap Gauge
Color : Blue
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 6017824565534
IncludedComponents : Mounting bolts for check valve and directional valve that mounts on top
ItemName : 1/4"F NPT-TUBE END IN-LINE CHECK-6K PSI - SHCV1-F4N-1P - 316 SS - 1# PSI CRACK
ItemPackageDimensions_Height : 16.8 centimeters
ItemPackageDimensions_Length : 4.8 centimeters
ItemPackageDimensions_Width : 15.7 centimeters
ItemTypeKeyword : industrial-check-valves
Manufacturer : Mako
Material : Stainless Steel
ModelName : Pilot Operated Check Valve
ModelNumber : VMCP
NumberOfItems : 1
PartNumber : SHCV1-F4N-1P
Pattern : AB- A and B port
ProductDescription : Pilot operated check valves are used to allow flow in one direction and not the other unless the pressure from a separate circuit is sufficient to pilot open the check valve. This is commonly used if you want to insure an actuator (cylinder or motor) will not move unless the valve is shifted. For example: An A port check valve will prevent flow coming back from the actuator unless the valve is shifted to pressurize the B port and pilot opening the A port to allow the actuator to move. The AB pilot operated check valve is commonly used to hold an actuator from moving in either direction unless the control valve mounted on top is shifted. Spool type directional control valves leak by design, allowing the actuators to drift over time. By adding an A and B port check valve the actuator will hold position in both directions for a long time. D03 (NG6) standard mounting pattern Maximum rated pressure = 3045 psi (210bar) Maximum Flow = 13.1 gpm (50 lpm) White label, logo free for OEM's Weight =2.4 lbs. (1.1 kg) NBR Buna seals Four M5 x 80mm long bolts included. Long enough to fasten a standard directional control valve to the top. Modular design allows stacking of other modules to create custom circuits to improve the system design. Modular valves are flexible, easy to replace and maintain without the cost of custom manifolds. Options: A=check valve in (A) port, pilot to open from (B) port B=check valve in (B) port, pilot to open from (A) port AB = Check valve in (A) and (B) ports, pilot to open from cross ports (A) and (B)
ProductSiteLaunchDate : 2021-03-12T13:19:01.439Z
Size : Female 1/4"
SpecificationMet : original equipment manufacturers
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600