Cart 2 india

Specification
Brand : TOSRWGLL
BulletPoint1 : 【Fit For】XCU04 replacement chain compatible with Makita XCU03Z 18V X2 (36V)LXT, XCU03PT1 18V X2(36V); Scotts LCS31140S; LiTHELi 40V U1CS21113; Greenworks CS40L210 40V (2906802). Kobalt 40V MODEL # KCS 4040-06/KCS 1440-06；Lynxx 63287 40V (Please note it fits the chainsaw / not the pole saw Lynxx); ECHO CS-305, CS-306;Ryobi 40V RY40502, RY40511; EGO CS1400 56C etc. please confirm your slot is 0.043" not 0.050" before you order it,this chain only installs on 0.043" slot.
BulletPoint2 : 【Part Number】Chainsaw chain fit for Makita: E-00228,90PX052G;Oregon: R52;Ryobi: 681858001; Power Care: Y52.043; Stihl 3610 005 0052, 61PMM352E; Trilink CL14352TL2, S52.043; Echo 90PX52CQ.
BulletPoint3 : 【Premium Quality】14 inch chain saw blade from high-quality steel,every saw chain comes protective oil to the surface, resists wear and improves strength, reducing chain tension changes, and allows the machine to operate more smoothly.
BulletPoint4 : 【Easy to Install】Don't waste time fumbling with complex installations. This chain is designed for easy and hassle-free installation. Whether you're a professional lumberjack or a homeowner looking to trim a few branches, you'll appreciate how simple it is to put this chain on your saw.(Always make sure the engine is turned off before you begin tensioning the chainsaw chain. Also, saw chain should only be tensioned while it is cool, not hot).
BulletPoint5 : 【After-Sales Guarantee】 We promise the premium quality and the best service. If you are not completely satisfied with your purchase, simply let us know and we will provide you with a FULL refund or replacement, no questions asked.
ChainType : Semi-Chisel
Color : Black
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0768771258128
ExternallyAssignedProductIdentifier2 : 768771258128
ExternallyAssignedProductIdentifier3 : 00036577477761
IncludedComponents : 3*14 inch chain saw
ItemLength : 18 inches
ItemName : TOSRWGLL 14" Chainsaw Replacement for Makita XCU04,XCU03z,681858001,E-00228 Chains 52 Drive Links,LP Pitch,0.043"Gauge,Chain Saw Blade (3 Packs)
ItemPackageDimensions_Height : 13 centimeters
ItemPackageDimensions_Length : 3.3 centimeters
ItemPackageDimensions_Width : 10.9 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : chain-saw-chains
ItemTypeName : 14" Chainsaw
Manufacturer : TOSRWGLL
ModelName : 14" Chainsaw
ModelNumber : E-00228
PartNumber : 20LPX080G
ProductDescription : TOSRWGLL 14 Inch Chainsaw Chain Replacement for Ryobi Chainsaw 40v, Ego 14 Chainsaw Chain, R52

1.Universal chain saw blade models: Echo CS-305 CS-306, CS-2511T, CS-305, CS-306, CS-330T, PPF-2620, PPF-280, PPT-2620, PPT-2620H, PPT-265, PPT-265S, PPT-266, PPT-266H, PPT-266S, PPT-280; Fits a wide range of chainsaw models,our chain is the perfect fit for your saw.

2.Low profile chain for increased cutting efficiency,narrow kerf reduces width of cutting face resulting in the saw chain moving through the cut faster than a standard kerf.

3.Top-plate filing indicators makes sharpening easier,oil holes help carry oil around full length of guide bar for improved lubrication

4.14" length designed with 52 drive links

5.Installation Method: Step 1 Locate the chain tension adjustment points on your chainsaw. Common locations for adjustment points include the side cover and the front of the chainsaw.

Step 2 Turn the adjustment screw "clockwise" to tighten, "counterclockwise" to loosen.

Step 3 Adjust the chainsaw chain tension. Use a chainsaw scrench to loosen your tensioning pin. This pin moves the bar for tensioning purposes and is attached to a screw.

Step 4 Hold the nose of the bar up as you adjust the tension (do not let go of the bar nose until after you've tightened the mounting nut in).

Step 5 For sprocket-nose guide bar, follow the solid-nose guide bar instructions, then give the tensioner another quarter to half turn. The bottoms of the lowest tie straps and cutters will come up and solidly contact the bottom of the guide bar rail. The tension for a sprocket-nose guide bar must be tighter than for the solid-nose guide bar.

Step 6 As you increase the chain tension, monitor the gap between the under-side of the guide bar and the slack chain. Continue tensioning the saw chain to remove this gap. The saw chain is properly tensioned when the drive links are fully seated into the groove of the guide bar and all chain tie-straps make light contact with the guide bar.

Step 7 With a gloved hand, pull the chainsaw chain along the top of the guide bar guide bar away from the engine towards the guide bar nose several times. The chainsaw chain should feel snug but still pull freely.


ProductSiteLaunchDate : 2024-06-01T02:39:50.350Z
Size : 18 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3