Cart 2 india

Specification
Brand : Archer
BulletPoint : All Archer chains are made from High Quality "Japanese" Steel!
BulletPoint1 : Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch (41-91cm)
BulletPoint2 : Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions
BulletPoint3 : Blued cutters provide superior corrosion resistance and improved strength
BulletPoint4 : "X" grind-Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes
BulletPoint5 : Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders
ChainType : Semi-Chisel
Color : Grey
DriveLinkCount : 84
ExternallyAssignedProductIdentifier : 9337535993189
ExternallyAssignedProductIdentifier1 : 036577478218
ExternallyAssignedProductIdentifier2 : 036577468219
ExternallyAssignedProductIdentifier3 : 0036577468219
ExternallyAssignedProductIdentifier4 : 0036577478218
ExternallyAssignedProductIdentifier5 : 00036577468219
GpsrSafetyAttestation : 1
IncludedComponents : 2 x saw chains
ItemDisplayDimensions_Height : 4.5 inches
ItemDisplayDimensions_Length : 7.5 inches
ItemDisplayDimensions_Width : 5.5 inches
ItemLength : 24 inches
ItemName : 24" Archer 3/8-063-84DL Ripping Chainsaw Chain replaces this size of Stihl 36RM 84 and Oregon 75RD084G and Carlton A3EP-RP-84E
ItemPackageDimensions_Height : 3.6 centimeters
ItemPackageDimensions_Length : 15.4 centimeters
ItemPackageDimensions_Width : 8.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : chain-saw-chains
Manufacturer : PMD International
Material : Steel
ModelName : 604 X 2
ModelNumber : A-063-84DL-RP
NumberOfItems : 1
PartNumber : 72LGX066G
PowerSourceType : gasoline-powered
ProductDescription : This is (1) loop of Archer Chainsaw Ripping Chain, the chain is 3/8 pitch .063 gauge and has 84 drive links, this chain replaces Stihl# 36RM 84 Oregon# 75RD084G and Carlton# A3EP-RP-84E. The semi-chisel cutters on this chain both left and right are in a standard sequence and have the top plate angle of each tooth set at the factory to 10 degrees for ripping wood. Ripping chain is used for chainsaw mills for sawing slabs and boards, etc. This chain is also used for cross-cutting, felling / bucking and cutting firewood when conditions are dirty or frozen. Semi-Chisel chain stays sharper longer then chisel chain, the round cutter will always stay sharp longer when cutting wood that is not clean. Use a standard 7/32" chainsaw chain round file when sharpening this chain. ***This chain is a non-safety professional chainsaw chain*** NOTE: ALL CHAINSAW CHAINS ARE A CALLED LENGTH AND REPLACEMENT CHAIN ALWAYS FIT WHEN YOU ORDER THE CORRECT PITCH, GAUGE, AND DRIVE LINK COUNT! If you need any help in determining what size chain, you need please contact us. Archer Saw Chain, Archer Guide Bars and Archer Accessories are known for quality and sold worldwide!
ProductSiteLaunchDate : 2019-01-31T15:18:25.820Z
Size : 24 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000