Cart 2 india

Specification
Brand : TOSRWGLL
BulletPoint1 : 【Fit For】Chain saw chain compatible with DeWalt: DCC690M1, DCCS670T1, DCCS670X1, DCCS690, DCCS690B, DCCS690H1, DCCS690M1, DCCS690X1, DCCS69B,please confirm your slot is 0.043" not 0.050" before you order it,this chain only installs on 0.043" slot.
BulletPoint2 : 【Part Number】Chainsaw chain fit for Dewalt: DWO1DT616T, 9061854 Oregon: 90PX056X, R56; EGO: AC1600, 3810671001;49-16-2715; Echo Echo 681946001, 90PX56CQ; Greenworks 31101590; Craftsman CMZCSC16; TriLink CL14356
BulletPoint3 : 【Premium Quality】16 inch chain saw blade from high-quality steel,every saw chain comes protective oil to the surface, resists wear and improves strength, reducing chain tension changes, and allows the machine to operate more smoothly.
BulletPoint4 : 【Easy to Install】Don't waste time fumbling with complex installations. This chain is designed for easy and hassle-free installation. Whether you're a professional lumberjack or a homeowner looking to trim a few branches, you'll appreciate how simple it is to put this chain on your saw.(Always make sure the engine is turned off before you begin tensioning the chainsaw chain. Also, saw chain should only be tensioned while it is cool, not hot).
BulletPoint5 : 【After-Sales Guarantee】 We are committed to excellent quality and the best service. If you are not completely satisfied with the purchased goods, please contact us in time, we will give a satisfactory solution.
ChainType : Low Profile
DriveLinkCount : 56
ExternallyAssignedProductIdentifier1 : 0768795453158
ExternallyAssignedProductIdentifier2 : 768795453158
GpsrSafetyAttestation : 1
IncludedComponents : 3pack 16" Chainsaw Chain
ItemLength : 16 inches
ItemName : 16" Chainsaw Chain Replacement for DeWalt DCCS670T,DCCS670X1,DCCS690,DCC690M1,DCCS690B Chainsaw,DWO1DT616T Chain Saw Blade 56 Drive Links,3/8"LP Pitch,0.043"Gauge (3 Packs)
ItemPackageDimensions_Height : 15.4 centimeters
ItemPackageDimensions_Length : 3.6 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : chain-saw-chains
Manufacturer : TOSRWGLL
ModelName : DWO1DT616T Chainsaw Chain
ModelNumber : DWO1DT616T
ProductDescription : TOSRWGLL 16 Inch Chainsaw Chain Replacement for DCCS670X1 Parts

1.Universal chain saw blade models: Dewalt DCCS670, DCCS670B DCCS670T1 DCCS670X1, DCCS690, DCCS690B, DCCS690H1, DCC690M1, DCCS690M1, DCCS690X1,Craftsman CMCCS660, CMCCS660E1 etc; Fits a wide range of chainsaw models,our chain is the perfect fit for your saw.

2.Low profile chain for increased cutting efficiency,narrow kerf reduces width of cutting face resulting in the saw chain moving through the cut faster than a standard kerf.

3.Top-plate filing indicators makes sharpening easier,oil holes help carry oil around full length of guide bar for improved lubrication

4.16" length designed with 56 drive links

5.Installation Method: Step 1 Locate the chain tension adjustment points on your chainsaw. Common locations for adjustment points include the side cover and the front of the chainsaw.

Step 2 Turn the adjustment screw "clockwise" to tighten, "counterclockwise" to loosen.

Step 3 Adjust the chainsaw chain tension. Use a chainsaw scrench to loosen your tensioning pin. This pin moves the bar for tensioning purposes and is attached to a screw.

Step 4 Hold the nose of the bar up as you adjust the tension (do not let go of the bar nose until after you've tightened the mounting nut in).

Step 5 For sprocket-nose guide bar, follow the solid-nose guide bar instructions, then give the tensioner another quarter to half turn. The bottoms of the lowest tie straps and cutters will come up and solidly contact the bottom of the guide bar rail. The tension for a sprocket-nose guide bar must be tighter than for the solid-nose guide bar.

Step 6 As you increase the chain tension, monitor the gap between the under-side of the guide bar and the slack chain. Continue tensioning the saw chain to remove this gap. The saw chain is properly tensioned when the drive links are fully seated into the groove of the guide bar and all chain tie-straps make light contact with the guide bar.

Step 7 With a gloved hand, pull the chainsaw chain along the top of the guide bar guide bar away from the engine towards the guide bar nose several times. The chainsaw chain should feel snug but still pull freely.


ProductSiteLaunchDate : 2024-08-19T06:53:07.313Z
Size : 16 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3
UnspscCode : 27112800