Cart 2 india

Specification
Brand : JACKSON SAFETY
BulletPoint1 : USE - For use with Jackson Safety #6 Centering Head
BulletPoint2 : MATERIAL - Made of hardened steel
BulletPoint3 : Suitable for marking but not to be used as a center punch
BulletPoint4 : SOLD - Packaged 1 each
BulletPoint5 : ✓ USES: Useful for marking locations before screwing, drilling or riveting holes in any material – Good for electricians or anyone that needs to make a lot of holes through metals - Used by Firefighters/EMT’s to shatter windows while extracting people from vehicle accidents – makes your AR castle nut staking easier.
Color : Gold
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8414753505484
ExternallyAssignedProductIdentifier1 : 024886074382
ExternallyAssignedProductIdentifier2 : 0024886074382
ExternallyAssignedProductIdentifier3 : 00024886074382
FinishType : Brass
HoleCount : 5
IncludedComponents : (1) TEKTON 3/8 Inch Center Punch | 66083
ItemName : Jackson Safety Hardened Steel Replacement Centering Pin for #6 Centering Head, Contour, 14798
ItemPackageDimensions_Height : 1.27 centimeters
ItemPackageDimensions_Length : 21.844 centimeters
ItemPackageDimensions_Width : 15.24 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-center-punches
Manufacturer : SureWerx
Material : Steel
Material1 : default
Material2 : default
Material3 : default
ModelName : 2439
ModelNumber : 14798
NumberOfItems : 1
OperationMode : Automatic,Automatically
PackageLevel : unit
PartNumber : 14798
ProductDescription : About The Drixet Spring Loaded Center Punch.

The Problem:
When Standing on a ladder ready to screw in fasteners into Pen-Marked Guides, the screw has a tendency to wander & drop down, which consumes time & makes the job really hard to complete & it’s annoying.
How can we prevent this from happening?

Out Solution:

The Drixet Adjustable Automatic Center Puncher.

Hole Punching:
The Punch will provide you with a large enough indentation so you’ll see where to start drill/screw while keeping the screw steady without wandering off.

Automatic vs. Manual:
No more Hammer use when trying to make center punches, with this Automatic Center Punch you will give just a small press & get a nice punch.

Adjustable:
The End Cap is made to regulate the striking tension force.

Non-Slip Control:
The Brass Body has a diamond pattern deeply ridged surface it shouldn’t slip.

Lightweight/Pocket Size:
Weighs just 2 oz. & is a handy tool that fits in your pocket.

Spring Loaded Mechanism:
The Hard Spring gives you an auto powerful high-impact strike on the surface when pressed.

Strong:
Strong enough to punch a Car Window, Beer Bottle Cap, Stainless Steel Bar, & all types of Metals & Materials.

Sharp Pinpoint:
The Extreme Sharp Heat-Treated Alloy Steel Point will give a starting location in any material with a hand snap.

Replaceable Tip:
The Tip is easy to open & replace with a new one when needed.

Tip:
Mark no more! The dimple that the Drixet Center Punch makes, will be your best mark helping your screw stay in place without dropping.

Use for:
Emergency Window Breaking (Escape Tool)
Pilot Holes
Pre-Drill Alternative
100% Precise Job’s
Clean & Uniform Impressions
Duck Work
Impact Tool for Hardness Testing
Tungsten Carbide Marking

A Toolbox Must Have!
ProductSiteLaunchDate : 2009-06-29T23:06:40-00:00
SheetCount : 1
Size : Small
Style : Center
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation1 : Aluminum
SurfaceRecommendation2 : Wood
UnitCount : 1